已解决： What adhesive is safe to use - Toshiba Laptop

What adhesive is safe to use

The port for the charger was pushed into the machine and broke the plastic guides that hold the port in place. What adhesive is safe to use to hold the port in place within the case of the laptop?

The upper picture is what it looks like with the port in place

The lower picture is what the broken plastic guides look like that should hold it in place. As you can see, the ones that are at the rear of the port and would keep it in place to plug it in are either missing, or severely bent.

The machine is a Toshiba Satellite C855-S5214.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 2

发帖于: 2014年9月6日

更多选项

Aaron, this will greatly depend on what the damage looks like. It will be difficult to use any kind of adhesive due to the constant strain on the connector. Post an image of your damage and lets see if we can figure it out. Right now my suggestion is to stay away from adhesive until further evaluation. It will also help if you give us the model of your computer.

First you'll have to bend the outer casing one out of the way and try to gently bring the back one to the inside. I would suggest some rubber cement to glues the connector in place. Try to minimize any further damage to the case. Also, remember that once the DC jack is glued in place, minimize the removal of the power plug. Hope this helps, good luck.

这个答案有帮助吗？

是否

得分 1

2条评论:

Thanks for your help. I will try the rubber cement. The owner has dropped it on this corner twice, the first time I was able to just reseat the jack and it was good to go. This time though, she broke this and the hinge for the screen.

由 Aaron 完成的 2014年9月6日

looks like you are due for a new bottom case:-)

由 oldturkey03 完成的 2014年9月6日

添加一条评论

东芝笔记本电脑

What adhesive is safe to use

1个答案

update

添加你的答案