跳转到主内容

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 个问题 查看全部

Trying to repair power button flex cable

This is my first attempt at repairing an iPad 2. The problem was a bad LCD screen. Everything was pink.

I removed the digitizer, and shattered it in the process. No problem, purchased a replacement. I also severed the power, volume, and mute ribbon cable. No problem, purchased another one. However, it seems I am missing a board? I am confused because I never took any boards out....

The bottom end of the ribbon cable appears to need to be connected to something, and the top part, just below the camera appears to have a cable that needs to go into it. I have attached pictures for better reference.

Here is the replacement cable that was ordered:

http://imgur.com/CaWaAcc

http://imgur.com/DJ0mdtc

Here is an overview of the inside (should there be a board just below (above in the pic) the Li-ion symbol?):

http://imgur.com/04RTj0I

There is a pot here for a cable end, but I do not see that end on this cable?

http://imgur.com/reL4UCV

Again, it appears something is missing..

http://imgur.com/vcTwwB8

From anther angle:

http://imgur.com/JoJQYAP

Any help would be extremely appreciated.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

It appears your ipad is a cdma version you have a power cable for a gsm version

here is the cable you need

Block Image

这个答案有帮助吗?

得分 1
添加一条评论

添加你的答案

David Walter 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 160