跳转到主内容

现在已停产的美能达相机的修复指南。

65 个问题 查看全部

Why won't the camera shutter release in my Minolta SRT SC-II camera?

The film advance lever seems to have been fully cycled and is at its normal rest position. Pushing shuttter button by hand and by cable does not cause the shutter to activate. There is no film in the camera now. Removed the bottom cover and could not locate any issues, Moved the two visible ratchet hooks clear of the Pawls and tried both advance and shutter with no luck. Expect that the shutter needs to be fired before the film advance lever is free.

Advice on where to look and what to look for? If I need to go super deep into the works I'll probably give up on it.

Thanks

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 1
添加一条评论

Android 维修工具包

A new screen or battery is one kit away.

现在开始购物

Android 维修工具包

A new screen or battery is one kit away.

现在开始购物

3个回答

已选择的解决方案

First I must warn you repairing cameras takes a bit of skill, steady hands and good eye sight. You will also need to have a good desk and desk lamp as the parts are tiny and can easily get damaged or lost. If you loose or break a part you may have a hard time replacing it so take you time and don't force things.

OK, so you want to take a crack at it. Here's the Minolta SRT 101 repair manual which is the same basic camera as yours: SRT 101 repair manual.

这个答案有帮助吗?

按维修分数 2

评论:

Thank you for the manual and advice.

添加一条评论

YouTube - Minolta SRT101 mirror lock up fix

这个答案有帮助吗?

按维修分数 0

评论:

Well, I just bought a srT101 at an antique flea market and for $10 this past weekend and when I got it home and loaded film into it, this is exactly the problem my new (old) camera posed. I saw your post requesting a solution and then checked out this short video on youtube. I was skeptical, but went and bought the valve oil and voila! the camera work as new! I hope you try this, as it really doesn't require any skill level (I have zero). Very pleased with myself right now.

添加一条评论

I just had this problem, and then solved it. I wanted to post here because I haven't seen this solution before. I know this post is old, but if I had found this method described when I googled this problem it would have saved me a lot of time, anxiety, and a half a roll of film.

My SRT SC-II was wound and jammed: the shutter button wouldn't depress. After an hour of fussing with the advance rollers, the mirror, etc, I discovered an elegant solution: I turned it upside down, kept pressure on the shutter button, and tapped the top of the camera (upside down) into the palm of my hand. Clack! It freed up. Since then, I've had an SRT-201 and an SRT-SC-II lock up on multiple occasions like this, and turning it upside down and tapping the top on my wrist *always* freed it up. Of course, there are lots of other causes for lockups that this will not fix, but it's worth a try! You don’t even have to take the film out. You just lose one frame, I guess. I don't know if tapping it upside down physically nudges the actual shutter release mechanism or if it nudges the mirror or what. But, all of my problems with SRT cameras have revealed that the mechanical bits are definitely sensitive to gravity and the orientation with which you’re holding the camera.

这个答案有帮助吗?

按维修分数 0
添加一条评论

添加你的答案

David 将永远感激不已
浏览统计数据:

过去的24小时: 12

过去的7天: 47

过去的30天: 241

总计 7,195