跳转到主内容

The Nintendo DSi is the third iteration in the Nintendo DS line, and made its debut in Japan in late 2008.

262 个问题 查看全部

Power Board Connector Ripped Of From Mobo (w/ pics)

Hello,

While I did find a couple questions similar to this one, my head hasn't come around a clear answer. I was at the process of fitting a new touch-screen on my DSi and I've accidentally popped open the Power Board Connector straight out from the Motherboard. Ignoring the problem temporarily, I continued on fitting the touch-screen in which was placed successfully. I refitted all the ribbon cables and the screws back on the motherboard, but I'm left with the broken connector.

The cable should have been disconnected from the connector like this:

Using a tool like a Spudger

And opened like this

Alas, mine has become like this (excuse the poor quality)

So I believe the two options I may have is to solder (?) the connector back onto the motherboard OR buy another power board altogether (I would be more comfortable with that). However, I'm not sure if that little casing for the cable comes with a standalone power board connector; so that option will be crossed off. All in all, I would highly appreciate if someone dusts off the confusion!

回答此问题 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

1个答案

最有帮助的答案

Elias Raed, your picture is very hard to interpret. If you broke the connector of the board you will have to either solder it back on (depends on the condition of the traces.) If you broke the plug you will need a new power board. Hope this helps, good luck.

Block Image

这个答案有帮助吗?

得分 1

3条评论:

Hello oldturkey thanks for the fast response!

Unfortunately, I did think the picture was too blurry and I cannot get a decent close up. But what you stated was correct. The whole connector is disconnected from the motherboard.

The part of the logic board and the part of the power board is still connected together, but isn't on the motherboard. I do believe the traces are still in good condition and possible soldering is at need. In the meantime, I'll have someone look at this and will update ASAP.

Thanks

完成的

Alas, there was a mistake on the comment before. Sadly I can not see any metallic traces on the body of the white socket (which sits on the motherboard).

完成的

Soldering the wires without the connector should work.

完成的

添加一条评论

添加你的答案

Elias 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 300