跳转到主内容

Updated version of the original iPad 2, released in March of 2012 with a smaller die processor and updated internal construction. Repair will require the use of heat and careful prying.

73 个问题 查看全部
问题已关闭

Replaced LCD, only get a backlight?

Hi,

My Ipad 2 2012 got pretty smashed up, i dismantled and the parts i needed were digitiser, lcd screen, power flex ribbon and headphone jack ribbon (runs from power flex and goes into logic board)

I have put it together and tested it and with the ipad plugged in i can see the backlight, i can also see it working when i try sticking it in dfu mode and recovery mode.

restores will not work as i keep getting errors (21,3194,3004) but it is being recognised by itunes.

does this sound like a hardware issue or software issue?

thanks :)

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

2个答案

Sounds like both, the backlight issue could be the result of not turning off the iPad before disconnecting the digitizer and LCD. That's called perm dim. It requires changing a chip and coil and intricate solder work. Did you try a hard reset? Holding down the menu and power button at the same time?

这个答案有帮助吗?

得分 0
添加一条评论

Tried that, by the time I got the parts to do any work on it the ipad

Had lost all it's charge, how can I inspect to see if this is the problem or

Is the only way to tell to replace it?

这个答案有帮助吗?

得分 0
添加一条评论
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 149