声誉积分: 1
1
Hey!.
I have a MacBook Pro unibody, late 09 model... and i want to reset it as much as possible.
My wift droped water in it.. and now it wont start... it been many days so it should be dry.
I want to remove the battery...
Why is there a labes that instructs me NOT to remove the battery?.
Brgds Kim
声誉积分: 35.1千
140
71
53
I don't know why - but i couldn't care less - especially in the case of a fluid damage (water and a battery is a bad mixture)
so let's start - the warranty is vioded anyway
here is the important part - get the logic board out of the MacBook.
you need rubbing alcohol and a soft paintbrush, clean everything carefully that look's like white/yellow/greenish or black mold - be careful - the parts are tiny - after you're done - let it dry (depends on the grade of the alcohol - i use 100% iso - better a day than to short) - DO NOT USE A HAIRDRYER!
if it's dry - reassemble it and try to start it.
这个答案有帮助吗？
Thanks.. i will try..
Rubbing alcohol contains about 30% water. A better cleaner would be isopropl alcohol, methanol or ethanol.
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 1,077
