Why is my Backlight not coming up after small spill?

Question

2011年初 MacBook Pro 13" 一体化机

782 个问题查看全部

Luvester @luvester

声誉积分: 1

1

发帖于: 2014年1月26日

更多选项

Why is my Backlight not coming up after small spill?

I spilled a little tea on my keyboard. But I had a keyboard cover so I immediately ripped the cover off, cleaned it, shut my laptop down, and let it sit for 2 days. I opened it up took the board out and cleaned it with some rubbing alcohol. I tried booting it up and the apple start up screen comes up then it goes black. But anytime I turn it on after that it stays black but It makes the boot up sound and everything else is running fine. My keyboard lighting button works and they all light up.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 -1

添加一条评论

1个答案

已选择的解决方案

originalmachead @originalmachead

声誉积分: 116.3千

66

68

359

发帖于: 2014年1月26日

更多选项

In cleaning, or before, the controller/fuse for the backlight may have been damaged. It's possible your reassembly left a lose connection on the LVDs cable.

Only examination by you for burned/swollen components or misaligned connectors might identify which is the cause.

If this answer is acceptable please remember to return and mark it.

这个答案有帮助吗？

是否

得分 1

5条评论:

I looked at some pictures and videos about dis-assembly and reassembly to make sure I got everything right. The cords look the same as the ones in the pictures and videos. Nothing looks burned or swollen. How would I go about checking the controller/fuse for the back light?

由 Luvester 完成的 2014年1月26日

I just dis-assembled it again and looked at everything to make sure. Reassembled and held down Cmd+opt+p+r to reset the PRAM. It came on and everything worked fine, like normal. Then I went to try a shut down to see if it would work again, the screen went black. Now on start up it is back at the original problem.

由 Luvester 完成的 2014年1月26日

Then your problem might be OS related. Some machines get white/black screens when there's problems with the OS or the HD. Try booting from a different source (maybe the Repair partition) or install disk. If that's ok run diagnostics on your HD or do a clean instal of the OS.

由 originalmachead 完成的 2014年1月26日

I restarted my laptop in OS X recovery and am currently restoring it from a time capsule. Will update with results.

由 Luvester 完成的 2014年1月27日

It got up to 96% then the screen went black and it restarted. It booted up with a black screen and I'm back at my original problem. So I don't know if it finished the time capsule restore and that didn't fix it. Or if it shut down before it finished and I'd have to do it again.

由 Luvester 完成的 2014年1月27日

添加一条评论

I looked at some pictures and videos about dis-assembly and reassembly to make sure I got everything right. The cords look the same as the ones in the pictures and videos. Nothing looks burned or swollen. How would I go about checking the controller/fuse for the back light? — Luvester
I just dis-assembled it again and looked at everything to make sure. Reassembled and held down Cmd+opt+p+r to reset the PRAM. It came on and everything worked fine, like normal. Then I went to try a shut down to see if it would work again, the screen went black. Now on start up it is back at the original problem. — Luvester
Then your problem might be OS related. Some machines get white/black screens when there's problems with the OS or the HD. Try booting from a different source (maybe the Repair partition) or install disk. If that's ok run diagnostics on your HD or do a clean instal of the OS. — originalmachead
I restarted my laptop in OS X recovery and am currently restoring it from a time capsule. Will update with results. — Luvester
It got up to 96% then the screen went black and it restarted. It booted up with a black screen and I'm back at my original problem. So I don't know if it finished the time capsule restore and that didn't fix it. Or if it shut down before it finished and I'd have to do it again. — Luvester

2011年初 MacBook Pro 13" 一体化机

Why is my Backlight not coming up after small spill?

1个答案

添加你的答案