Burnt inductor and PCB on GTX560 Ti KFA2 Pci Express Graphics Card

Question

显卡

各种显卡维修指南。

110 个问题查看全部

kris Irwin @krisirwin

声誉积分: 19

1

2

发帖于: 2013年12月12日

更多选项

Burnt inductor and PCB on GTX560 Ti KFA2 Pci Express Graphics Card

Hi

Just wondered if someone could help with this problem.

I have a GTX560 Ti KFA2 Pci Express Graphics Card one of the 0.3uH chips which I believe to be a power inductor has burnt out.

It has also left a nasty burn mark on the pcb itself which looks repairable, I just wanted some info on the burnt out part and what is a suitable replacement.

Any help would be great thanks

Hi thanks for the reply and a very HAPPY NEW YEAR TO ONE AND ALL!!!!

Ok back to the post I've taken some shots of the graphics card which shows all surrounding components any advice on what to replace defective part with would be most helpful.

Just wanted to know if a repair is worth it or maybe a throw away jobby (I hate throwing things away) many thanks again.

Hi again anyone know of suitable replacements for these ferrite inductors, otherwise will chuck it in the bin LOL.

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 0

2条评论:

any chance you could post another images straight down onto the components? That way we can see how image one and two relate.

由 oldturkey03 完成的 2013年12月28日

You are absolutely right. Those are 0.3uH Ferrite inductors. Now we just have to figure out what the rest of the values are.

由 oldturkey03 完成的 2013年12月28日

添加一条评论

2个答案

any chance you could post another images straight down onto the components? That way we can see how image one and two relate. — oldturkey03
You are absolutely right. Those are 0.3uH Ferrite inductors. Now we just have to figure out what the rest of the values are. — oldturkey03

Matt @matt64350 声誉积分: 85 3 · Answer 1 · 2014-01-14T06:25:43-07:00

Matt @matt64350

声誉积分: 85

3

发帖于: 2014年1月14日

更多选项

You may be able to take it to radioshack and someone point you in the right direction other than that unless you KNOW its bad why not try reflowing it. I have fixed several boards and cards just reflowing all the solder and making sure nothing is loose or wobbly. If its messed up stick a wire in their with it to take up the extra space or bridge it to where it runs if you need too. I looked for a part like that and didn't easily find one you could also try calling some electronics parts supplies sites online and talking to them about it. Definitely dont throw that away if nothing else sell it as is on ebay someone will probbaly pay 5 or 10 bucks for it.

这个答案有帮助吗？

是否

得分 0

1条评论:

Hi thanks for your reply unfortunately here in the UK we don't have shops like Radio Shack, at least ones that are genuinely helpful. I can't seem to find anything on the web that points to the numbers on the inductor. Will have to persevere with it, haven't actually stuck it in a machine to test because of the damage thanks again Kris.

由 kris Irwin 完成的 2014年1月16日

添加一条评论

Carlos Inga @carlosinga 声誉积分: 1 · Answer 2 · 2018-08-24T11:00:25-07:00

Carlos Inga @carlosinga

声誉积分: 1

发帖于: 2018年8月24日

更多选项

Hi, just replace the 0.3uh inductor, but before you test it, beware the 6 pins connector are not in short circuit, o test with other power supply or other mainboard. after that tell me what happens.

这个答案有帮助吗？

是否

得分 0

添加一条评论

显卡

Burnt inductor and PCB on GTX560 Ti KFA2 Pci Express Graphics Card

Update

Update

2个答案

添加你的答案