Volume down button doesn't work

Question

iPad 2 Wi-Fi EMC 2415

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 个问题查看全部

问题已关闭

Brent Huff @brenthuff

声誉积分: 2千

12

8

7

发帖于: 2013年12月7日

更多选项

Volume down button doesn't work

Recently while changing the screen on an iPad 2 the power button flex cable got cut, so the power button wasn't working anymore. Ordered new cables. Connecting the cables and now the volume down button doesn't work. I have tried about 4-5 different cables (purchased from 2 different suppliers). The original cable volume and mute/rotation lock switch worked. But with new cables everything BUT the volume down button works.

Anybody seen anything like this? Is it possible somehow something else affects it? Can 4-5 different cables REALLY have a bad volume down?

powered off and back on. nothing.

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

1个答案

TommyJames337 @tommyjames337 声誉积分: 2千 14 35 · Answer 1 · 2013-12-07T12:13:09-07:00

TommyJames337 @tommyjames337

声誉积分: 2千

14

35

发帖于: 2013年12月7日

更多选项

More than anything else, it sounds to me like the connector where the cable connects to the logic board is probably bad. If you're noticing something this consistent, it's more likely that a pin in the connector was bent, or the cables aren't making a full connection.

If the connector on the logic board is damaged, there's nothing much you can do unless you have access to a Microscope and very very fine soldering equipment.

这个答案有帮助吗？

是否

得分 0

添加一条评论