Model No. A1367 / 8, 16, 32, or 64 GB capacity

1290 个问题 查看全部

iPod parts broke where you enter the charger.

The little pieces in my ipod at the bottom where you plug the charger in at are broke, and im not sure if its replaceable..

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 0
添加一条评论
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12

1个答案

已选择的解决方案

Jenna M, it is replaceable, but will require some very special soldering. You will of course have to totally disassemble the iPod. The dock connector is solder onto the board. You will have to do lots of soldering. You will have to un-solder two anchors and about 30 connections, they are very small and close to each other. So you have to take extra care not to shorten the pins out. After that you will have to resolder all those connections and the two anchors. Not an easy task, unless you are used to soldering small pieces. This video is not for a 4th gen but will give you an idea what you are up against. Hope this helps, good luck.

这个答案有帮助吗?

按维修分数 1
添加一条评论

添加你的答案

Jenna M 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 48