eMachines 2220 desktop computer.

4 个问题 查看全部

cannot get my system to reboot

Hi there,i purchased the above system in the uk 5years ago. after the power supply blew and fried the motherboard i got both replaced,recently i done a system restore and the system would not reboot,showing the message

/Windows/system32config/windows file is missing or corrupt.

it says i may be able to repair it by running the set-up media that i recieved with my purchase but i cannot find my original set-up media. is there any way that i can get the system back working or will i have to purchase a new copy of

WINDOWS XP.

YOURS JOHNNYP

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 0
添加一条评论
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12

5个回答

已选择的解决方案

Contact eMachines and see if they will sell you a copy of the original setup disk. If they won't buy a OEM copy of XP with a new COA and install that. Ralph

这个答案有帮助吗?

按维修分数 3

评论:

thanks for your answer.will try as suggested

添加一条评论

I've come across a number of 2220 boards and many Dell boards that were populated with defective Rubycon electrolytic caps. Recapped 16 such boards already and now they work just fine.

Look at the motherboard very closely with a flashlight and see if any of the caps are swollen on the top where that "X" is cut into the top. Some may pop out the bottom. If any look like that then I suspect the board is defective.

The 1800 ufd 6.3 vdc caps are notoriously suspect. They were counterfeits as well as other values on the board.

这个答案有帮助吗?

按维修分数 0

评论:

great advise and excellent repair, but the repair on this particular one was strictly software related.

添加一条评论

You can attempt to do a system recovery (it will reset the computer to factory specs) from the boot menu. Here is a link to a website that will give you step by step instructions. I hope this helps.

http://www.ehow.com/how_6904280_do-syste...

这个答案有帮助吗?

按维修分数 0

评论:

Good answer to an almost 2 year old question.:)

Thank you for your response.

添加一条评论

If you have access to another PC with a CD/DVD burner download a copy of the Ultimate Bootdisk and copy the ISO file to a CD. Botup from that CD and use one of the HD diagnostics to test the HD first to be sure the HD isn't fried before you invest in the oem or the system dsiks from emachines.

这个答案有帮助吗?

按维修分数 0
添加一条评论

I got my late Mom-in-Law's "e" computer with a startup issue. The caps are fine, and my Linux live disks are working in it fine. The Ultimate Bootdisk mentioned above would have the same effect, with the advantage of having the diagnostic tools readily available.

这个答案有帮助吗?

按维修分数 0
添加一条评论

添加你的答案

john pullar 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 3,846