修复你的物品 社区 商店

iPhone4S是第五代iPhone。网络制式为GSM/CDMA ，存储容量有8GB、16GB、32GB、64GB可选，机身颜色有黑色、白色可选。维修iPhone4S是容易的，需要耐心，用到的工具有螺丝刀、撬棒等。

2193 个问题 查看全部
问题已关闭

更多选项

Sleep/wake button and digitizer not working after screen replacement

Ok folks, this is an iPhone 4S working on AT&T. Screen cracked. Bought a replacement, this one:

http://www.amazon.com/gp/product/B0068PR...

Replacement was uneventful (I've done it about 6 times in the past), used ifixit directions. No problems during repair from what I could tell.

When I get it all back together, I notice that 1) the sleep/wake button does nothing and 2) the digitizer doesn't work (i.e., the screen turns on fine with home button, but there's no touch response whatsoever).

I've tried restore via iTunes, seemed to work normally, but no change afterward. Running latest OS (6.1.2 is it?). Can't do a hard reset without a sleep/wake button.

Any help would be greatly appreciated! Thank you!

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

As I see it three things could have happened:

1) You've damaged the power button flex cable. (Most likely)

2) The flex cable isn't properly connected.

3) You've damaged the logic board. (Let's hope not)

As for the digitizer, the digitizer flex cable has probably been damaged during install or you've received it faulty.

这个答案有帮助吗？

是 否
得分 2

2条评论:

+ I'd go with "you've received it faulty"

由完成的

Just wanted to bring some closure to this: I opened up the phone and realized that I had indeed ripped the digitizer ribbon. And the reason the power button wasn't working is that I hadn't connected the power button cable. Duh! Thanks for your help!

由完成的

添加一条评论

更多选项

Here's a photo of the ripped digitizer ribbon cable. When they say to be careful, they aren't joking! :-)

Thanks again.

这个答案有帮助吗？

是 否
得分 0

1条评论:

You're very welcome :)

由完成的

添加一条评论
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 1,419