声誉积分: 1
1
Does anyone know if it's possible to replace a A1212 MacBook Pro 17 inch screen with a different resolution?
Currently i have 1680x1050 but i see a lot of 1920x1024 screens... Would it be possible to replace it. The video card supports the resolution on an external monitor.
声誉积分: 87.6千
161
82
213
I haven't tried this, but theoretically it should be possible...
First, follow this guide to remove the display assembly.
Then, use steps 18-32 of this guide and some intuition to remove the LCD panel.
Finally, follow steps 33-38 of the same guide for the installation procedure.
Good luck! Please be sure to post the results.
指南
难度：
困难
—
1 - 2 hours
指南
难度：
非常困难
这个答案有帮助吗？
+ Ralph
And what were the results on this attempt?
Curious :)
声誉积分: 404
5
1
sorry to be a bummer, but the apple logic boards have rom's that only recognize specific displays. If you install it, it will turn on but once the bootloader finishes and the OS starts to load, the screen will go black and you wont be able to brighten it
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 1
过去 30 天： 3
总计 3,158
3条评论
I think may be one for Ben to answer. From what I find its not possible but I would go with what he says. Ralph
由 rj713 完成的
How can i contact Ben for this? I would imagine that the resolution might be fixed from the screen and not the interface. If so it maybe is possible... I keep on hoping :)
由 Questor 完成的
Anyone?
由 Questor 完成的