Model A1312 / Mid 2010 / 3.2 GHz Core i3 or 2.8 & 3.6 GHz Core i5 or 2.93 GHz Core i7, ID iMac11,3

293 个问题 查看全部

Replacing the video synchronisation cable

Hello,

Unfortunatly while tearing down my new iMac (to change the Internal HardDrive) something went wrong (%&#* clumsiness lol) and the 4 pin synchronisation video cable was scratched (which link the 27" screen and the board to left of the alimentation unit).

Does anyone know where I can find some replacement cable ? I've looked everywhere unsuccessfully :-(

Thanks a lot for any response !

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 1

评论:

Thanks for your response.. i've looked on the apple site and call a tech center. Unfortunatly degradations due to bad manutention break the warranty as i supposed :-(

I've managed to "fix" the cable but a new one would not be luxury lol

Here again, any clue would be very helpfull, thanks !

添加一条评论
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

4个回答

已选择的解决方案

This machine was still under warranty. Parts will be very hard to find as it is so new. It might still be covered if it was in the original condition.

这个答案有帮助吗?

按维修分数 2
添加一条评论

Apple's part number for the VSYNC cable for this model is 922-9161, hope this helps.

Chris

这个答案有帮助吗?

按维修分数 2
添加一条评论

I "googled" it but no relevant result :-( I'll keep the part N° however and thanks for the intell ;-)

这个答案有帮助吗?

按维修分数 1
添加一条评论

Applecomponents 64NE FARRAGUT ST. PORTLAND OR. 97211-2206 . I purchased this cable from them.Best of luck!

这个答案有帮助吗?

按维修分数 0
添加一条评论

添加你的答案

fpeliss 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 2,083