声誉积分: 997
7
4
2
sorry!
my friend give to me an old powermac g5 for big problem.
after mac os start, the temperature is about 90° and once it reaches 100° goes in protection.
i see no fluid loss, but i think the problem is with cooling.
any idea? thanks
this is solution? http://www.saunalahti.fi/~holindho/g5-qu...
really thanks
声誉积分: 685.2千
3.4千
1.1千
2.6千
Run your Apple Hardware Test (AHT) from the original system installation disk. Hold down the "D" key on start up with the disk installed and see if its the coolant or possibly one or more of the fans.
这个答案有帮助吗？
i will try, but all fans are going fast...
thanks for support
finally find asd but now the g5 won't start :(
his make fan check, and monitor don't show nothing :(
no moore idea?
really thanks
过去 24 小时： 0
过去 7 天： 1
过去 30 天： 1
总计 357
2条评论
Is that 90 degrees F or C
由 mayer 完成的
is celsius degrees :(
probably i have to change water pump and get new liquid! it is not easy but I groped with the link step.
if I succeed, I will proceed with the calibration fan with ASD Dual Boot 2.5.8
由 lapo 完成的