LCD Stress pressure marks after installing a replacement screen

Question

iPhone 4

第四代iPhone。维修过程直观易懂，但前置玻璃和LCD面板无法分开，只能作为同一零件更换。GSM版本， 8, 16, or 32 GB 容量 / 型号 A1332 / 黑色或白色

2375 个问题查看全部

Robert G @robergza

声誉积分: 917

MS Solutions

9

20

2

发帖于: 2012年12月5日

更多选项

LCD Stress pressure marks after installing a replacement screen

I had bought several lcd + digitizer replacements from different seller around eBay. Some of them send good lcd + digitizer replacements and after several purchases some lcd + digitizer replacements have this flaw when applying a little pressure around the lcd + digitizer replacement.

And is that after installing them they will show some stress marks on top and bottom of the lcd + digitizer replacement when applying a little bit of pressure. (Pic Related)

How can I know that a LCD is bad without installing them. I buy bulk orders from time to time since i own a repair shop.

Or anyone has a way to solve this issue?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

1条评论

By the way Robert where do you get your Bulk orders ? I have a repair shop too and do the same .

由 Mitch Rush 完成的 2012年12月5日

添加一条评论

2个答案

已选择的解决方案

Kevin @kevin11181

声誉积分: 43

2

1

发帖于: 2012年12月5日

更多选项

This has to do with not correctly cushioning or applying adhesive to the underside of the screen. Mine does this as well and it is a common error when doing it. To get it done correctly try using a small amount of tape and super glue to hold the screen down.

这个答案有帮助吗？

是否

得分 1

1条评论:

Hi Kevin,

Do you mean using tape/super glue during the application of glue or after (when the marks are present)?

How would you suggest avoiding this error when applying the glue?

Thanks so much h!

由 Prisha 完成的 2016年6月22日

添加一条评论

By the way Robert where do you get your Bulk orders ? I have a repair shop too and do the same . — Mitch Rush
Hi Kevin,

Do you mean using tape/super glue during the application of glue or after (when the marks are present)?

How would you suggest avoiding this error when applying the glue?

Thanks so much h! — Prisha

Mitch Rush @mitchrush 声誉积分: 5.6千 6 3 4 · Answer 1 · 2012-12-05T18:27:43-07:00

Mitch Rush @mitchrush

声誉积分: 5.6千

6

3

4

发帖于: 2012年12月5日

更多选项

Robert there is a way to test an LCD Digitizer without installing it, first, remove the back cover of your phone, then remove the steel cover plate that covers all of the ribbon cable connection points at the top by the camera, unplug the LCD Digitizer connections and carefully move them out of the way far enough to plug in and test the new LCD Digitizer, there is a (jumper) Ribbon cable made that makes this process much easier, https://www.gounlock.com/details.php?ite... I use it to test every screen before installation !

这个答案有帮助吗？

是否

得分 0

添加一条评论

iPhone 4

LCD Stress pressure marks after installing a replacement screen

2个答案

添加你的答案