跳转到主内容

iPhone4S是第五代iPhone。网络制式为GSM/CDMA ,存储容量有8GB、16GB、32GB、64GB可选,机身颜色有黑色、白色可选。维修iPhone4S是容易的,需要耐心,用到的工具有螺丝刀、撬棒等。

2170 个问题 查看全部

My iPhone works but the screen doesn't?

i've been told there may be something in the iphone that has caused the screen to stop working, the phone still works, i can take pictures and turn the volume on and off with the button on the side, but the screen wont display anything. Could it be something to do with the fixings on the inside and how much would it cost to get spare parts?

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 13
添加一条评论

5个回答

已选择的解决方案

Just press home and power button for 20 seconds then Apple icon will appear and after 2 mins screen will come back on

Update

Well the answer is there for any future problems someone may have just hope it helps

这个答案有帮助吗?

得分 14

评论:

Hi Steven was this just after a repair that it happened?

完成的

OMG I loove you!! this actually worked! I was about to cry

God bless you

完成的

Very very happy!!!!!!!!! Thank you.

完成的

This worked!!! Thank you!!!!!!!!!!!!

完成的

this is so amzing thank you !!!!!!!

完成的

显示更多的7条评论

添加一条评论

I would first try and reseat the connectors for the LCD and Digitizer. If they popped loose or have any corrosion sometimes that will be an easy fix. Unplug the battery, Remove the plate holding them down and reseat. Check for corrosion or burnt or damaged pins while your in there. But unless its gotten wet, you should be okay. Once you plug them back in, plug the battery back in and see if it kicks on.

If it does, close it back up and your ready to rock and roll.

If it doesn't, you may have a bad LCD or Damage to the mainboard.

Also, if it kicks on with the apple logo but then the back light shuts off a split second later, that's usually the indicator of a bad LCD. Replacing the front screen assembly should resolve this.

这个答案有帮助吗?

得分 2
添加一条评论

You tried a hard reset or restore? Do you see any shadows of your screen when you angle the display toward the light? It is possible that the display assembly may need to be replaced, due to a malfunctioning LCD. It is possible that the ribbon cables or connectors are corroded, or loose. It is possible that your backlight IC/coil are malfunctioning. There are plenty of possibilities. The cost for spare parts is depending on your location.

这个答案有帮助吗?

得分 0
添加一条评论

salam...

it seems like an lcd problem... you will have to replace the display assembly to know for sure. I hope its not the motherboard.

Malik.

这个答案有帮助吗?

得分 0
添加一条评论

Make sure that lcd flex cable is fitted properly in the logic board.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Sarah 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 1

总计 46,137