跳转到主内容

型号A1318,闪存容量:32及64GB

299 个问题 查看全部
问题已关闭

Digitizer is unresponsive after being submerged in water.

I dropped my ipod touch 32gb 3rd gen in the water. I bought replacement parts for it (lcd/digitizer), the new LCD works fine, but the digitizer isn't responding. How do I replace the wire port or fix this so I can use it again? Any help is appreciated!

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

You may want to start by removing the existing glasss and digitizer assembly first, inspect the connectors thoroughly as well as the connectors on the ipod logicboard. if possible, use a clean and dry tooth brush to first brushing it dry. If it still looks dirty, then clean it with isobutyl alchol. Then brush the surfact one more time, making sure that the connector surface is very nice and shiny. Wait for it to dry thoroughly before reconnecting because alchol does have a large water content.

Reconnect and try it again. if that does not work, then buy a replacement digitizer plus glass from ebay and install that one in. That should elimnate any posibility that the logic board digitier control module may be defective.

Do check iFixit for instructions on how to remove your existing digitizer. If is fairly straight forward.

这个答案有帮助吗?

得分 0
添加一条评论
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 595