当前版本： Dan
文本:
| - | Here’s a good vid on the process [https://www.youtube.com/watch?v=jcGgWO4X7GI] as far as the heat it doesn’t take much I set my heat gun to 125 Fahrenheit and as seen in the vid holding the air stream over the bezel and away from the rubber edge. |
|---|---|
| + | Here’s a good vid on the process [link|https://www.youtube.com/watch?v=jcGgWO4X7GI|MacBook Air LCD repair, how to replace LCD only] as far as the heat it doesn’t take much I set my heat gun to 125 Fahrenheit and as seen in the vid holding the air stream over the bezel and away from the rubber edge. |
状态:
open
原帖由： Dan
文本:
Here’s a good vid on the process [https://www.youtube.com/watch?v=jcGgWO4X7GI] as far as the heat it doesn’t take much I set my heat gun to 125 Fahrenheit and as seen in the vid holding the air stream over the bezel and away from the rubber edge.
状态:
open