原帖由： BeaufDeFrance

文本:

Here the solution

Confirmed the DP2 signal pair do not go anywhere. So do the other pair DP3 pair signals (pin8&9) on V2 consoles go nowhere. Took me awhile to confirm because they do go somewhere on the OLED. The values found are internally in the PI3USB chip where they are pulled down by 100k each line. If you were to remove all components off the board, I expect that to be open to GND.

[link|https://imgur.com/ccqpSK3|p13usb datasheet|new_window=true]

状态:

open