跳转到主内容
帮助

原帖由: assortedrubbish ,

文本:

It may be now that the fixing which the screw goes into (usually seen as a copper colored barrel shape), is broken away from the laptop casing itself  :(  So no matter what you do, the whole screw and barrel will just be spinning around.

The only thing i can suggest now is to use a 0.5mm drill (hard to find,  and you've gotta be soooo gentle with them),  and tap a small hole into the remains of the screw shaft - then use a smaller sharp ended screw to grip the old one, and hope it can move it.

If the screw and barrel really are turning, then the screw is probably so tight in the barrel that you can only drill the whole thing out till it gives up and falls out.

One other method I've used a few times successfully is to use a cutting disc on a small drill (a very thin one),  and make a slice in the top of the screw head - then a  flat blade screwdriver can turn it as normal.

Screws are a wonderful thing,  until they just wont unscrew  :(

状态:

open