跳转到主内容
帮助

原帖由: frank ,

文本:

Honestly you have to make sure over and over again that you have:

1st removed all that is in the way, old adhesive and  broken glass

2nd... Fit and   fit again... It usually takes me 10-20 times to get that perfect fit.

3rd The Metal Bracket... You might have placed this bracket too much to the right or the left. I usually lift the lcd up to the light and put the metal bracket perfectly in the middle so that you can see the camera hole.

4th. If possible try to keep as much of the original adhesive as possible especially in the top area. Use a heat gun to take it off

5th.  Always start by fitting the top portion of the lcd into the frame( that is where the metal bracket fits into frame) The metal bracket has two or three prongs that fit and hold down the glass. So adhesive plus the bracket makes the glass stay on.

6th It would be better explained with reassembly guides.

状态:

open