当前版本： Paul Schreiber

标题:

LED cable disconnected during disassembly

文本:

I disassembled my AirPort Time Capsule A1470. In doing so, the LED cable ([guide|61924|#3 in Step 4]) became disconnected from the LED on the case.

[image|2577170]

[image|2577169]

(This is a ridiculous situation. Not sure why it wasn’t clipped to the case instead of soldered…)

If I were to solder in back on, which cable goes to which connector? Can anyone with a working one share a photo or diagram?

设备:

AirPort Time Capsule A1470

状态:

open

已接受的回答:

编辑： Paul Schreiber

标题:

LED cable disconnected during disassembly

文本:

I disassembled my AirPort Time Capsule A1470. In doing so, the LED cable ([guide|61924|#3 in Step 4]) became disconnected from the LED on the case.

[image|2577170]

[image|2577169]

(This is a ridiculous situation. Not sure why it wasn’t clipped to the case instead of soldered…)

If I were to solder in back on, which cable goes to which connector? Can anyone with a working one share a photo or diagram?

设备:

AirPort Time Capsule A1470

状态:

open

已接受的回答:

原帖由： Paul Schreiber

标题:

LED cable disconnected during disassembly

文本:

I disassembled my AirPort Time Capsule A1470. In doing so, the LED cable ([guide|61924|#3 in Step 4]) became disconnected from the LED on the case.

[image|2577170]

[image|2577169]

(This is a ridiculous situation. Not sure why it wasn’t clipped to the case instead of soldered…)

If I were to solder in back on, which cable goes to which connector? Can anyone with a working one share a photo or diagram?

设备:

AirPort Time Capsule A1470

状态:

open