跳转到主内容
帮助

当前版本: Dan ,

标题:

How to fix Broken Internal Display Connector on iMac 27"

文本:

Hi,
I have a 27” iMac 27 that one of my coworkers has damaged the display connector while pulling the LCD hard and snapped some pins from the board.
This was done while I was replacing a hard drive that failed. "Common thing with the iMacs."
Before coming here I have Googled the problem, read so many forums and found a post in Macrumors.com, where people had this issue and fixed it by ordering a new connector and soldering it on.
I went ahead and ordered that connector, when i got it I quickly start soldering it. Unfortunately it is a bit challenging and spent days to get right without bridging it, but it is impossible.
I have become so impatient that I want to throw the whole thing in the garbage, but I have got so many video projects to do being a video editor.
I want to know if other people are experiencing this issue, and how to they dealt with it. Also if there are anyway repair places that I send the logic board and they fix it for cheap, I know how much Apple is demanding and I just can't afford that.
Thank you in advance for any replies.
I have attached some photos for reference:
-[image|232621|align=center]
+[image|232621]
-[ http://tinypic.com/r/2wovhuu/7|Broken INT DP]
+Dedicated GPU
-[image|232622|align=center]
+[image|232622]
-[http://tinypic.com/r/2utqpn5/7|Part]
+The solder joints
+
+[image|1806391]
+
+The part

设备:

iMac Intel 27" EMC 2390

状态:

open

已接受的回答:

122838

编辑: Dan ,

标题:

How to fix Broken Internal Display Connector on iMac 27"

文本:

Hi,
I have a 27” iMac 27 that one of my coworkers has damaged the display connector while pulling the LCD hard and snapped some pins from the board.
This was done while I was replacing a hard drive that failed. "Common thing with the iMacs."
Before coming here I have Googled the problem, read so many forums and found a post in Macrumors.com, where people had this issue and fixed it by ordering a new connector and soldering it on.
I went ahead and ordered that connector, when i got it I quickly start soldering it. Unfortunately it is a bit challenging and spent days to get right without bridging it, but it is impossible.
I have become so impatient that I want to throw the whole thing in the garbage, but I have got so many video projects to do being a video editor.
I want to know if other people are experiencing this issue, and how to they dealt with it. Also if there are anyway repair places that I send the logic board and they fix it for cheap, I know how much Apple is demanding and I just can't afford that.
Thank you in advance for any replies.
-I have attached some photos for reference [http://tinypic.com/r/2quuq0n/7|The board]
+I have attached some photos for reference:
[image|232621|align=center]
[ http://tinypic.com/r/2wovhuu/7|Broken INT DP]
[image|232622|align=center]
[http://tinypic.com/r/2utqpn5/7|Part]

设备:

iMac Intel 27" EMC 2390

状态:

open

已接受的回答:

122838

编辑: Dan ,

标题:

How to fix Broken Internal Display Connector on iMac 27"

文本:

Hi,
-I have an iMac 27" that one of my coworker has damaged the display connector while pulling the LCD hard and snapped some pins from the board. This was done while i was replacing a hard drive that failed. "Common thing with the iMacs." Before coming here i have googled the problem, red so many forums and found a post in Macrumors.com, where people had this issue and fixed it by ordered the small connector and soldering it. I went ahead and ordered that connector, when i got it i quickly start soldering it. Unfortunately it is a bit challenging and spent days to get right without bridging it, but it is impossible. I have become so impatient that i want to throw the whole thing in the garbage, but i have got so many video projects to do being a video editor. I want to know if other people are experiencing this issue, and how to they dealt with it. Also if there are anyway repair places that i send the logic board and they fix it for cheap, i know how much apple is demanding and i just can't afford that. Thank you in advance for any replies.
+I have a 27” iMac 27 that one of my coworkers has damaged the display connector while pulling the LCD hard and snapped some pins from the board.
+
+This was done while I was replacing a hard drive that failed. "Common thing with the iMacs."
+
+Before coming here I have Googled the problem, read so many forums and found a post in Macrumors.com, where people had this issue and fixed it by ordering a new connector and soldering it on.
+
+I went ahead and ordered that connector, when i got it I quickly start soldering it. Unfortunately it is a bit challenging and spent days to get right without bridging it, but it is impossible.
+
+I have become so impatient that I want to throw the whole thing in the garbage, but I have got so many video projects to do being a video editor.
+
+I want to know if other people are experiencing this issue, and how to they dealt with it. Also if there are anyway repair places that I send the logic board and they fix it for cheap, I know how much Apple is demanding and I just can't afford that.
+
+Thank you in advance for any replies.
I have attached some photos for reference [http://tinypic.com/r/2quuq0n/7|The board]
[image|232621|align=center]
[ http://tinypic.com/r/2wovhuu/7|Broken INT DP]
[image|232622|align=center]
[http://tinypic.com/r/2utqpn5/7|Part]

设备:

iMac Intel 27" EMC 2390

状态:

open

已接受的回答:

122838

编辑: oldturkey03 (投票详情) ,

标题:

How to fix Broken Internal Display Connector on iMac 27"

文本:

Hi,

I have an iMac 27" that one of my coworker has damaged the display connector while pulling the LCD hard and snapped some pins from the board. This was done while i was replacing a hard drive that failed. "Common thing with the iMacs." Before coming here i have googled the problem, red so many forums and found a post in Macrumors.com, where people had this issue and fixed it by ordered the small connector and soldering it. I went ahead and ordered that connector, when i got it i quickly start soldering it. Unfortunately it is a bit challenging and spent days to get right without bridging it, but it is impossible. I have become so impatient that i want to throw the whole thing in the garbage, but i have got so many video projects to do being a video editor. I want to know if other people are experiencing this issue, and how to they dealt with it. Also if there are anyway repair places that i send the logic board and they fix it for cheap, i know how much apple is demanding and i just can't afford that. Thank you in advance for any replies.

I have attached some photos for reference [http://tinypic.com/r/2quuq0n/7|The board]

[image|232621|align=center]

[ http://tinypic.com/r/2wovhuu/7|Broken INT DP]

[image|232622|align=center]

[http://tinypic.com/r/2utqpn5/7|Part]

设备:

iMac Intel 27" EMC 2390

状态:

open

已接受的回答:

+122838

编辑: oldturkey03 ,

标题:

How to fix Broken Internal Display Connector on iMac 27"

文本:

Hi,
I have an iMac 27" that one of my coworker has damaged the display connector while pulling the LCD hard and snapped some pins from the board. This was done while i was replacing a hard drive that failed. "Common thing with the iMacs." Before coming here i have googled the problem, red so many forums and found a post in Macrumors.com, where people had this issue and fixed it by ordered the small connector and soldering it. I went ahead and ordered that connector, when i got it i quickly start soldering it. Unfortunately it is a bit challenging and spent days to get right without bridging it, but it is impossible. I have become so impatient that i want to throw the whole thing in the garbage, but i have got so many video projects to do being a video editor. I want to know if other people are experiencing this issue, and how to they dealt with it. Also if there are anyway repair places that i send the logic board and they fix it for cheap, i know how much apple is demanding and i just can't afford that. Thank you in advance for any replies.
I have attached some photos for reference [http://tinypic.com/r/2quuq0n/7|The board]
-[image|232621]
+[image|232621|align=center]
[ http://tinypic.com/r/2wovhuu/7|Broken INT DP]
-[image|232622]
+[image|232622|align=center]
[http://tinypic.com/r/2utqpn5/7|Part]

设备:

iMac Intel 27" EMC 2390

状态:

open

编辑: oldturkey03 ,

标题:

How to fix Broken Internal Display Connector on iMac 27"

文本:

Hi,
I have an iMac 27" that one of my coworker has damaged the display connector while pulling the LCD hard and snapped some pins from the board. This was done while i was replacing a hard drive that failed. "Common thing with the iMacs." Before coming here i have googled the problem, red so many forums and found a post in Macrumors.com, where people had this issue and fixed it by ordered the small connector and soldering it. I went ahead and ordered that connector, when i got it i quickly start soldering it. Unfortunately it is a bit challenging and spent days to get right without bridging it, but it is impossible. I have become so impatient that i want to throw the whole thing in the garbage, but i have got so many video projects to do being a video editor. I want to know if other people are experiencing this issue, and how to they dealt with it. Also if there are anyway repair places that i send the logic board and they fix it for cheap, i know how much apple is demanding and i just can't afford that. Thank you in advance for any replies.
I have attached some photos for reference [http://tinypic.com/r/2quuq0n/7|The board]
+[image|232621]
+
[ http://tinypic.com/r/2wovhuu/7|Broken INT DP]
+
+[image|232622]
[http://tinypic.com/r/2utqpn5/7|Part]

设备:

iMac Intel 27" EMC 2390

状态:

open

编辑: Walter Galan ,

标题:

How to fix Broken Internal Display Connector on iMac 27"

文本:

Hi,

I have an iMac 27" that one of my coworker has damaged the display connector while pulling the LCD hard and snapped some pins from the board. This was done while i was replacing a hard drive that failed. "Common thing with the iMacs." Before coming here i have googled the problem, red so many forums and found a post in Macrumors.com, where people had this issue and fixed it by ordered the small connector and soldering it. I went ahead and ordered that connector, when i got it i quickly start soldering it. Unfortunately it is a bit challenging and spent days to get right without bridging it, but it is impossible. I have become so impatient that i want to throw the whole thing in the garbage, but i have got so many video projects to do being a video editor. I want to know if other people are experiencing this issue, and how to they dealt with it. Also if there are anyway repair places that i send the logic board and they fix it for cheap, i know how much apple is demanding and i just can't afford that. Thank you in advance for any replies.

I have attached some photos for reference [http://tinypic.com/r/2quuq0n/7|The board]

[ http://tinypic.com/r/2wovhuu/7|Broken INT DP]

[http://tinypic.com/r/2utqpn5/7|Part]

设备:

-iMac Intel 27" EMC 2309 and 2374 and 2390
+iMac Intel 27" EMC 2390

状态:

open

编辑: Walter Galan ,

标题:

How to fix Broken Internal Display Connector on iMac 27"

文本:

Hi,

I have an iMac 27" that one of my coworker has damaged the display connector while pulling the LCD hard and snapped some pins from the board. This was done while i was replacing a hard drive that failed. "Common thing with the iMacs." Before coming here i have googled the problem, red so many forums and found a post in Macrumors.com, where people had this issue and fixed it by ordered the small connector and soldering it. I went ahead and ordered that connector, when i got it i quickly start soldering it. Unfortunately it is a bit challenging and spent days to get right without bridging it, but it is impossible. I have become so impatient that i want to throw the whole thing in the garbage, but i have got so many video projects to do being a video editor. I want to know if other people are experiencing this issue, and how to they dealt with it. Also if there are anyway repair places that i send the logic board and they fix it for cheap, i know how much apple is demanding and i just can't afford that. Thank you in advance for any replies.

I have attached some photos for reference [http://tinypic.com/r/2quuq0n/7|The board]

[ http://tinypic.com/r/2wovhuu/7|Broken INT DP]

[http://tinypic.com/r/2utqpn5/7|Part]

设备:

-iMac Intel 27"
+iMac Intel 27" EMC 2309 and 2374 and 2390

状态:

open

原帖由: Masuod ,

标题:

How to fix Broken Internal Display Connector on iMac 27"

文本:

Hi,

I have an iMac 27" that one of my coworker has damaged the display connector while pulling the LCD hard and snapped some pins from the board. This was done while i was replacing a hard drive that failed. "Common thing with the iMacs." Before coming here i have googled the problem, red so many forums and found a post in Macrumors.com, where people had this issue and fixed it by ordered the small connector and soldering it. I went ahead and ordered that connector, when i got it i quickly start soldering it. Unfortunately it is a bit challenging and spent days to get right without bridging it, but it is impossible. I have become so impatient that i want to throw the whole thing in the garbage, but i have got so many video projects to do being a video editor. I want to know if other people are experiencing this issue, and how to they dealt with it. Also if there are anyway repair places that i send the logic board and they fix it for cheap, i know how much apple is demanding and i just can't afford that. Thank you in advance for any replies.

I have attached some photos for reference [http://tinypic.com/r/2quuq0n/7|The board]

[ http://tinypic.com/r/2wovhuu/7|Broken INT DP]

[http://tinypic.com/r/2utqpn5/7|Part]

设备:

iMac Intel 27"

状态:

open