跳转到主内容

修复你的物品

维修的权力

商店

帮助

当前版本: jayeff ,

文本:

@bloomnfun ,
 
It might depend if the battery is holding its' charge or not.
 
One symptom of a failing battery is that it will appear to "fully charge" voltage wise, but then when you go to use it it will discharge very quickly or even if you don't use it, it will self discharge more quickly than usualusual, as its’ charge capacity has actually diminished.
One symptom of a failing battery is that it will appear to "fully charge" voltage wise, but then when you go to use it it will discharge very quickly or even if you don't use it, it will self discharge more quickly than usualusual, as its’ charge capacity has actually diminished.
 
Even rechargeable batteries have a lifespan.
 
If you do decide to replace it make sure that you get a [https://www.jaycar.com.au/powertech-aa-1-2v-2000mah-ni-mh-solder-tabs/p/SB1751|battery with solder tabs - example only] (assuming its a AA size and not a AAA size) as a replacement. This way you won’t have to apply too much heat to the battery to solder it into position as you would if you just got a standard replacement battery

状态:

open

原帖由: jayeff ,

文本:

@bloomnfun ,

It might depend if the battery is holding its' charge or not.

One symptom of a failing battery is that it will "fully charge" voltage wise, but then when you go to use it it will discharge very quickly or even if you don't use it, it will self discharge more quickly than usual.

Even rechargeable batteries have a lifespan.

If you do decide to replace it make sure that you get a [https://www.jaycar.com.au/powertech-aa-1-2v-2000mah-ni-mh-solder-tabs/p/SB1751|battery with solder tabs - example only] (assuming its a AA size and not a AAA size) as a replacement. This way you won’t have to apply too much heat to the battery to solder it into position as you would if you just got a standard replacement battery

状态:

open