跳转到主内容
帮助

当前版本: Kristen Gismondi (投票详情) ,

文本:

Our GE side by side water dispenser worked wonderfully until about 4 years ago when the water line started freezing.  Then it was once or twice a month and now it's every day.  In the past, I would leave the freezer door open for a while and it would melt, but found I had to leave it open for longer periods.  I finally found this answer board and read where the line was freezing.  Thank you!   The line was froze again today.  So, after cursing it out, I took an old infant snot sucker, filled it with the hottest tap water I could stand, shot the hot water straight up into the dispenser until I no longer had to struggle to force it through.  Line isn't frozen and water came out with a few flakes of mold.  In the past I had forced hot water and vinegar up the line from the bottom and gotten mold as well.  I hope this cheaper and quicker solution helps someone.

状态:

-deleted
+open

编辑: Tara BronxMom ,

文本:

Our GE side by side water dispenser worked wonderfully until about 4 years ago when the water line started freezing.  Then it was once or twice a month and now it's every day.  In the past, I would leave the freezer door open for a while and it would melt, but found I had to leave it open for longer periods.  I finally found this answer board and read where the line was freezing.  Thank you!   The line was froze again today.  So, after cursing it out, I took an old infant snot sucker, filled it with the hottest tap water I could stand, shot the hot water straight up into the dispenser until I no longer had to struggle to force it through.  Line isn't frozen and water came out with a few flakes of mold.  In the past I had forced hot water and vinegar up the line from the bottom and gotten mold as well.  I hope this cheaper and quicker solution helps someone.

状态:

-open
+deleted

原帖由: Tara BronxMom ,

文本:

Our GE side by side water dispenser worked wonderfully until about 4 years ago when the water line started freezing.  Then it was once or twice a month and now it's every day.  In the past, I would leave the freezer door open for a while and it would melt, but found I had to leave it open for longer periods.  I finally found this answer board and read where the line was freezing.  Thank you!   The line was froze again today.  So, after cursing it out, I took an old infant snot sucker, filled it with the hottest tap water I could stand, shot the hot water straight up into the dispenser until I no longer had to struggle to force it through.  Line isn't frozen and water came out with a few flakes of mold.  In the past I had forced hot water and vinegar up the line from the bottom and gotten mold as well.  I hope this cheaper and quicker solution helps someone.

状态:

open