跳转到主内容

修复你的物品

维修的权力

商店

帮助

原帖由: Rany ,

文本:

There are a number of reasons why this can happen:

* The sensor is not properly aligned. Tear down and reassembly may help fix this. Make sure the plastic bracket is properly positioned like in the original;
* The sensor cable or sensor solder joints were damaged during the transfer and now the whole front camera cable assembly needs to be replaced;
* The cable needs reseating into the connector on the board;
* The screen itself is somewhat defective and allowing too much light through. Specially for the black screens. Transfer the small white filter or try coloring a little bit the opening where the sensor sits behind the screen.

状态:

open