当前版本： Ben ,
文本:
| Had this before. If a USB ammeter is reporting 0.00 while iPad is on and you have tried multiple cables and chargers plus the charging port is in good condition it is 100% charging IC. |
| The one I did today in particular reported fake charging on some cables and some didn't detect at all from For your case I would suspect charging port on its way out. Usually one or two pins are pushed down under microscope indicating it is worn out. |
| The one I did today in particular reported fake charging on some cables and some didn't detect at all from For your case I would suspect charging port on its way out. Usually one or two pins are pushed down under microscope indicating it is worn out. |
状态:
open
编辑： Ben ,
文本:
| Had this before. If a USB ammeter is reporting 0.00 while iPad is on and you have tried multiple cables and chargers plus the charging port is in good condition it is 100% charging IC. The one I did today in particular reported fake charging on some cables and some didn't detect at all from iPad. |
| Had this before. If a USB ammeter is reporting 0.00 while iPad is on and you have tried multiple cables and chargers plus the charging port is in good condition it is 100% charging IC. The one I did today in particular reported fake charging on some cables and some didn't detect at all from iPad. |
状态:
open
原帖由： Ben ,
文本:
Had this before. If a USB ammeter is reporting 0.00 and you have tried multiple cables and chargers plus the charging port is in good condition it is 100% charging IC.
状态:
open