跳转到主内容
帮助

当前版本: Carlos Ferrari ,

文本:

Well it does work!
 
First I had to fire up the multimeter and do a continuity test to figure it out which was what:
 
[image|1764280]
 
[image|1764283]
 
Then it was just a matter of sourcing a microscope and do some soldering (more of a pain than one might realise):
 
[image|1764281]
 
And it worked! :D
 
[image|1764282]
 
Now I have to find out where to get the receiver to work inside the case…
 
The small Apple in the front - the one previously used for this - is blocked by the power plug so I'm thinking either the big Apple on the back (which can be a pain plus not get good reception) or the vents in the bottom of the case (will be my first option).
 
UPDATE:
 
Got the IR sensor at the bottom, near the vents.
 
Tricky parts were:
 
1) get the cable out of the way of the speaker (one of the pictures is blurry but is inside the case and it's the best I could do)
1) get the cable out of the way of the speaker (one of the pictures is blurry but is inside the case and it's the best I could do)
 
[image|1775885]
 
[image|1775884]
 
2) get the damnbloody thing facing down (this took AGES!)
2) get the damnbloody thing facing down (this took AGES!)
 
[image|1775887]
 
 
 
And it works! You might need to sort of ‘aim’ the remote a bit but it works! :D

状态:

open

编辑: Carlos Ferrari ,

文本:

Well it does work!
 
First I had to fire up the multimeter and do a continuity test to figure it out which was what:
 
[image|1764280]
 
[image|1764283]
 
Then it was just a matter of sourcing a microscope and do some soldering (more of a pain than one might realise):
 
[image|1764281]
 
And it worked! :D
 
[image|1764282]
 
Now I have to find out where to get the receiver to work inside the case…
 
The small Apple in the front - the one previously used for this - is blocked by the power plug so I'm thinking either the big Apple on the back (which can be a pain plus not get good reception) or the vents in the bottom of the case (will be my first option).
 
Will update once it's finished :)UPDATE:

Got the IR sensor at the bottom, near the vents.

Tricky parts were:

1) get the cable out of the way of the speaker (one of the pictures is blurry but is the best I could do)

[image|1775885]

[image|1775884]

2) get the damn thing facing down (this took AGES!)

[image|1775887]



And it works! You might need to sort of ‘aim’ the remote a bit but it works! :D
Will update once it's finished :)UPDATE:

Got the IR sensor at the bottom, near the vents.

Tricky parts were:

1) get the cable out of the way of the speaker (one of the pictures is blurry but is the best I could do)

[image|1775885]

[image|1775884]

2) get the damn thing facing down (this took AGES!)

[image|1775887]



And it works! You might need to sort of ‘aim’ the remote a bit but it works! :D

状态:

open

编辑: Carlos Ferrari ,

文本:

Well it does work!
 
First I had to fire up the multimeter and do a continuity test to figure it out which was what:
 
[image|1764280]
 
[image|1764283]
 
Then it was just a matter of sourcing a microscope and do some soldering (more of a pain than one might realise):
 
[image|1764281]
 
And it worked! :D
 
[image|1764282]
 
Now I have to find out where to get the receiver to work inside the case…
 
The small Apple in the front - the one previously used for this - is blocked by the power plug so I'm thinking either the big Apple on the back (which can be a pain plus not get good reception) or the vents in the bottom of the case (will be my first option).
 
Will update once it's finished :)

状态:

open

原帖由: Carlos Ferrari ,

文本:

Well it does work!

First I had to fire up the multimeter and do a continuity test to figure it out which was what:

[image|1764280]

Then it was just a matter of sourcing a microscope and do some soldering (more of a pain than one might realise):

[image|1764281]

And it worked! :D

[image|1764282]

Now I have to find out where to get the receiver to work inside the case…

The small Apple in the front - the one previously used for this - is blocked by the power plug so I'm thinking either the big Apple on the back (which can be a pain plus not get good reception) or the vents in the bottom of the case (will be my first option).

Will update once it's finished :)

状态:

open