跳转到主内容
帮助

当前版本: Kristen Gismondi (投票详情)

文本:

Hi, I own a Transformer Book T100TA  and faced the same problem too.

I have been using 3rd party charger since my original cable damaged from a tight bend.

I have been searching the original charger for a while and finally decided to dissect the original usb connector since the original charger is so expensive. The I found the usb connector is so unique that you can’t simply replace it with an ordinary usb charging cables. Sort of similar to iphone charging cable.  If you have a good soldering skills, you might  be able to build one yourself as it’s considered as a technique called micro-soldering. You would required to slice open a micro usb connector and solder the smd resistor into place and seal up everything.  Hope this helped.

[image|1763853]

[image|1763861]

[image|1763863]

状态:

-deleted
+open

编辑: iRobot

文本:

Hi, I own a Transformer Book T100TA and faced the same problem too.
I have been using 3rd party charger since my original cable damaged from a tight bend.
I have been searching the original charger for a while and finally decided to dissect the original usb connector since the original charger is so expensive. The I found the usb connector is so unique that you can’t simply replace it with an ordinary usb charging cables. Sort of similar to iphone charging cable. If you have a good soldering skills, you might be able to build one yourself as it’s considered as a technique called micro-soldering. You would required to slice open a micro usb connector and solder the smd resistor into place and seal up everything. Hope this helped.
-[image|1763853][image|1763861][image|1763863]
+[image|1763853]
+
+[image|1763861]
+
+[image|1763863]

状态:

-open
+deleted

编辑: Fong Chin Weng

文本:

Hi, I own a Transformer Book T100TA and faced the same problem too.
I have been using 3rd party charger since my original cable damaged from a tight bend.
I have been searching the original charger for a while and finally decided to dissect the original usb connector since the original charger is so expensive. The I found the usb connector is so unique that you can’t simply replace it with an ordinary usb charging cables. Sort of similar to iphone charging cable. If you have a good soldering skills, you might be able to build one yourself as it’s considered as a technique called micro-soldering. You would required to slice open a micro usb connector and solder the smd resistor into place and seal up everything. Hope this helped.
-[image|1763853]
+[image|1763853][image|1763861][image|1763863]

状态:

open

原帖由: Fong Chin Weng

文本:

Hi, I own a Transformer Book T100TA  and faced the same problem too.

I have been using 3rd party charger since my original cable damaged from a tight bend.

I have been searching the original charger for a while and finally decided to dissect the original usb connector since the original charger is so expensive. The I found the usb connector is so unique that you can’t simply replace it with an ordinary usb charging cables. Sort of similar to iphone charging cable.  If you have a good soldering skills, you might  be able to build one yourself as it’s considered as a technique called micro-soldering. You would required to slice open a micro usb connector and solder the smd resistor into place and seal up everything.  Hope this helped.

[image|1763853]

状态:

open