跳转到主内容
帮助

原帖由: Minho ,

文本:

How much current? It’s not like there is some main switch on the logic board that cuts all the current to the components.

Take a look at the schematic and the moment a battery or a USB power source is connected, quite a few components receive VDD_MAIN. There is a line called PP1V8_ALWAYS and as the name suggests…it is always on.

So if the board is still dead, focus on all of the subsystems powered by the PMIC to see if there are any shorts or related issues. They may be the cause of your problem.

状态:

open