跳转到主内容
帮助

原帖由: nancy1861 ,

标题:

“Battery 0% charging” issue after a clean Windows 10 install

文本:

After clean Win 10 installs batteries now show “0% charging” - but they never charge.

Both have “Battery 0% charging” issue after a clean Windows 10 install;  '''Asus GL752VW-DH74'''  -and-  '''Toshiba Satellite L15W-B1320'''

I think the clean install messed with something the Laptops need to charge the batteries - but there's always some "trick-fix".   Both laptops’ batteries worked before the clean Win-10 install.

Lots of troubleshooting.  Reloaded all computer specific drivers from manufacture sites.  Already uninstall/reinstalled battery driver in Device Manager.  Replaced power supplies, reseated plugs on the motherboard.   BTW - I'm a retired PC tech.

(Some say to leave the battery unplugged from the mainboard - then Uninstall battery driver in Device Manager.  Restart it 4-5 times. Re-plug battery, then re-install the ACPI control driver ​ - haven't tried yet ... seems more of a ni-cad fix than a lithium fix.)

I don't know how to test a discharged battery - it was working perfect before the clean Win-10 install.  Diagnosis says it's still fine - it reads 0% charging - so it's recognized.     ​​

​The Asus now doesn't recognize it's SSD, only the 1TB drive after Win-10 clean install.  I don't care, but could that have caused a battery issue?  Grasping here . . .

​

On the Toshiba I replaced; 1)power-jack 2)battery 3)mainboard 4)another battery (plenty of switching power-supplies).  Nothing fixed it - so grandkid uses it plugged in only. ​

Thank you, ​  Nancy Nelson

PS ​

I've contacted MS concerning clean Win-10 installs - they say, "This issue has not been reported "across the board", therefore it is an issue for the computer's manufacturer".    ​

Seems like a Win-10 issue to me!

设备:

PC Laptop

状态:

open