跳转到主内容
帮助

当前版本: Dan ,

文本:

Eve Ann Wallis - This series has a unique issue! Apple moved the microphone hole! And in doing so have messed up a few people. You need to modify the bottom tape with a small cut out so the hole is not covered. Here’s the location of the microphone hole:
 
[image|2154574]
 
At this point you should get another adhesive tape kit and after fully cleaning the old tapes off, modify the new set as needed but cutting a small area at the bottom edge of the strip where the mic is and give that a go!
At this point you should get another adhesive tape kit and after fully cleaning the old tapes off, modify the new set as needed but cutting a small area at the bottom edge of the strip where the mic is and give that a go!
 
But, before you put the display back on check your mic cable is connected properly as outlined in step 57 in this guide and the ribbon cable is not damaged [guide|95631]

状态:

open

编辑: Dan ,

文本:

Eve Ann Wallis - This series has a unique issue! Apple moved the microphone hole! And in doing so have messed up a few people. You need to modify the bottom tape with a small cut out so the hole is not covered. Here’s the location of the microphone hole:
 
[image|1705221]
 
[image|2154574]
 
At this point you should get another adhesive tape kit and after fully cleaning the old tapes off, modify the new set as needed and give that a go!
 
But, before you put the display back on check your mic cable is connected properly as outlined in step 57 in this guide and the ribbon cable is not damaged [guide|95631]

状态:

open

编辑: Dan ,

文本:

Eve Ann Wallis - This series has a unique issue! Apple moved the microphone hole! And in doing so have messed up a few people. You need to modify the bottom tape with a small cut out so the hole is not covered. Here’s the location of the microphone hole:
 
[image|1705221]
 
[image|2154574]
 
At this point you should get another adhesive tape kit and after fully cleaning the old tapes off, modify the new set as needed and give that a go!
 
But, before you put the display back on check your mic cable is connected properly as outlined in step 57 in this guide and the ribbon cable is not damaged [guide|95631]

状态:

open

原帖由: Dan ,

文本:

Eve Ann Wallis - This series has a unique issue! Apple moved the microphone hole! And in doing so have messed up a few people. You need to modify the bottom tape with a small cut out so the hole is not covered. Here’s the location of the microphone hole:

[image|1705221]

At this point you should get another adhesive tape kit and after fully cleaning the old tapes off, modify the new set as needed and give that a go!

But, before you put the display back on check your mic cable is connected properly as outlined in step 57 in this guide and the ribbon cable is not damaged [guide|95631]

状态:

open