跳转到主内容
帮助

当前版本: Dan ,

文本:

Hard Drives often get fragmented files which will slow the system down. You would need to use a tool which can see the fragmentation as well as fix it. I would first replace the SATA cable as you are about to do. I would place a strip of electricians tape across the uppercase where the cable crosses as the rough aluminum tends to wear the cable. Be careful in your placement as you don’t want sharp folds but smooth arcs. Many people think you can bend the cable any which way which is in fact not true! The foil conductors can be damaged as well as the shielding with the sharp folds.
 
After replacing the cable it when yoyou want to run the defragmentation using a tool like this: [https://www.prosofteng.com/drive-genius-4/|Drive Genius 4]. Even though the drive is mostly empty the scatter plot of the data blocks can cause the head assembly of the drive need to cross one side to the other which slows the reading or writing.
After replacing the cable it when yoyou want to run the defragmentation using a tool like this: [https://www.prosofteng.com/drive-genius-4/|Drive Genius 4]. Even though the drive is mostly empty the scatter plot of the data blocks can cause the head assembly of the drive need to cross one side to the other which slows the reading or writing.
 
Replacing the HDD to a SSD will also improve performance, which is a good direction to go as well

状态:

open

原帖由: Dan ,

文本:

Hard Drives often get fragmented files which will slow the system down. You would need to use a tool which can see the fragmentation as well as fix it. I would first replace the SATA cable as you are about to do. I would place a strip of electricians tape across the uppercase where the cable crosses as the rough aluminum tends to wear the cable. Be careful in your placement as you don’t want sharp folds but smooth arcs. Many people think you can bend the cable any which way which is in fact not true! The foil conductors can be damaged as well as the shielding with the sharp folds.

After replacing the cable it when yo want to run the defragmentation using a tool like this: [https://www.prosofteng.com/drive-genius-4/|Drive Genius 4]. Even though the drive is mostly empty the scatter plot of the data blocks can cause the head assembly of the drive need to cross one side to the other which slows the reading or writing.

Replacing the HDD to a SSD will also improve performance, which is a good direction to go as well

状态:

open