跳转到主内容
帮助

当前版本: Charles Jutkins ,

文本:

Just use a skinny blade phillps head screw driver or something thin like a feeler gauge to pop
the external button out , its just a pressure fit. I think the external button itself is the most of the problem
-with these . Its either misaligned in the case of always on or worn off or the actuator knub that hits
+with these . Its either misaligned in the case of always on or worn off on the actuator knub that hits
the actual switch is worn down.
The first picture doesn't seem to show a model 7818

状态:

open

编辑: Charles Jutkins ,

文本:

Just use a skinny blade phillps head screw driver or something thin like a feeler gauge to pop
the external button out , its just a pressure fit. I think the external button itself is the most of the problem
-with these . Its either misaligned in the case of always on or off or the actuator knub that hits
+with these . Its either misaligned in the case of always on or worn off or the actuator knub that hits
-the switch is worn down.
+the actual switch is worn down.
The first picture doesn't seem to show a model 7818

状态:

open

编辑: Charles Jutkins ,

文本:

Just use a skinny blade phillps head screw driver or something thin like a feeler gauge to pop
the external button out , its just a pressure fit. I think the external button itself is the most of the problem
with these . Its either misaligned in the case of always on or off or the actuator knub that hits
the switch is worn down.
+
+The first picture doesn't seem to show a model 7818

状态:

open

原帖由: Charles Jutkins ,

文本:

Just use a skinny blade phillps head screw driver or something thin like a feeler gauge to pop

the external button out , its just a pressure fit. I think the external button itself is the most of the problem

with these .  Its either misaligned in the case of always on or off or the actuator knub that hits

the switch is worn down.

状态:

open