跳转到主内容
帮助

当前版本: Nick Hollis ,

文本:

The problem is this your question has a two part answer yes you can change the nand flash membermemory on a logic board. you can also switch it BUT in order to activate the phone sadly you must wipe the nand disk n reprogram it to the S/N of the device so like the gentlegentleman above stated you need some some lowlevel programing knowledgeserious microsoldering know-how and how-to proper handle this extremely delicate tiny chip to properly activate the chipcomplete this task. this is because apple servers are trying to prevent counterfit phones from being activated by there servers. your phone would not be counterfit BUT because of apple servers having this feature your new phone would fall into this catagory thus forcing the phone into DFU recovery mode upon boot and DFU mode requires the phone the have a full restore to factory settings with all memory and data erased.. Sorry Geremy C i know how it is to have your life inside a phone and i totally feel for you :( Try Wondershares Dr Phone toolkit.. it has a recovery feature for broken phones that may be helpful im not sure if u need to be able to power it on or not but give it a look. hope this helps.
The problem is this your question has a two part answer yes you can change the nand flash membermemory on a logic board. you can also switch it BUT in order to activate the phone sadly you must wipe the nand disk n reprogram it to the S/N of the device so like the gentlegentleman above stated you need some some lowlevel programing knowledgeserious microsoldering know-how and how-to proper handle this extremely delicate tiny chip to properly activate the chipcomplete this task. this is because apple servers are trying to prevent counterfit phones from being activated by there servers. your phone would not be counterfit BUT because of apple servers having this feature your new phone would fall into this catagory thus forcing the phone into DFU recovery mode upon boot and DFU mode requires the phone the have a full restore to factory settings with all memory and data erased.. Sorry Geremy C i know how it is to have your life inside a phone and i totally feel for you :( Try Wondershares Dr Phone toolkit.. it has a recovery feature for broken phones that may be helpful im not sure if u need to be able to power it on or not but give it a look. hope this helps.

状态:

open

原帖由: Nick Hollis ,

文本:

The problem is this your question has a two part answer  yes you can change the nand flash member on a logic board. you can also switch it BUT in order to activate the phone sadly you must wipe the nand disk n reprogram it to the S/N of the device so like the gentle above stated you need some some lowlevel programing knowledge to properly activate the chip. this is because apple servers are trying to prevent counterfit phones from being activated by there servers. your phone would not be counterfit BUT because of apple servers having this feature your new phone would fall into this catagory thus forcing the phone into DFU recovery mode upon boot and DFU mode requires the phone the have a full restore to factory settings with all memory and data erased.. Sorry Geremy C i know how it is to have your life inside a phone and i totally feel for you :( Try Wondershares Dr Phone toolkit.. it has a recovery feature for broken phones that may be helpful im not sure if u need to be able to power it on or not but give it a look. hope this helps.

状态:

open