跳转到主内容
帮助

当前版本: Steve ,

文本:

My 5yo pushed in a SD upside down and it bent the WP pin beyond repair.
 
Nintendo uses Mitsumi CIM-J44N slots. theres arethese slots have normally open slotstype contacts for CD en WP.
Nintendo uses Mitsumi CIM-J44N slots. theres arethese slots have normally open slotstype contacts for CD en WP.
 
http://www.mitsumi.co.jp/latest/Catalog/pdf/connect_cim_j35n_e.pdf
 
so if no card is insterted, or write-protected, the contact is open.
 
Since the pin was heavely bent (in my case), there was no repair possible to the pin.
Since the pin was heavely bent (in my case), there was no repair possible to the pin.
 
I pulled out the pin, and puzzedbuzzed out the motherboard.
I pulled out the pin, and puzzedbuzzed out the motherboard.
 
The WP (write protect) and CD (Card detect) lines have jumper pads on them.
 
So i just put a solder blob on the WP line jumper, and now it always reports as not write-protected. (who needs WP anyway?)
 
Quick and easy fix.
 
[image|1344264]
 
[image|1344271]

状态:

open

编辑: Steve ,

文本:

My 5yo pushed in a SD upside down and it bent the WP pin beyond repair.
 
Nintendo uses Mitsumi CIM-J44N slots. theres are normally open slots.
 
http://www.mitsumi.co.jp/latest/Catalog/pdf/connect_cim_j35n_e.pdf
 
so if no card is insterted, or write-protected, tothe contact is open.
so if no card is insterted, or write-protected, tothe contact is open.
 
Since the pin was heavely bent (in my case), there was no repair to the pin.
 
I pulled out the pin, and puzzed out the motherboard.
 
The WP (write protect) and CD (Card detect) lines have jumper pads on them.
 
So i just put a solder blob on the WP line jumper, and now it always reports as not write-protected. (who needs WP anyway?)
 
Quick and easy fix.
 
[image|1344264]
 
[image|1344271]

状态:

open

原帖由: Steve ,

文本:

My 5yo pushed in a SD upside down and it bent the WP pin beyond repair.

Nintendo uses Mitsumi CIM-J44N slots. theres are normally open slots.

http://www.mitsumi.co.jp/latest/Catalog/pdf/connect_cim_j35n_e.pdf

so if no card is insterted, or write-protected, to contact is open.

Since the pin was heavely bent (in my case), there was no repair to the pin.

I pulled out the pin, and puzzed out the motherboard.

The WP (write protect) and CD (Card detect) lines have jumper pads on them.

So i just put a solder blob on the WP line jumper, and now it always reports as not write-protected. (who needs WP anyway?)

Quick and easy fix.

[image|1344264]

[image|1344271]

状态:

open