跳转到主内容
帮助

当前版本: frankjward69 ,

文本:

The battery has 6 li-ion pouch cells, NO 18650 Cans in the battery pack.
 
Good thing is the pouch cells are: 3.7v, 14.7Wh .... Commonly available.
Good thing is the pouch cells are: 3.7v, 14.7Wh .... Commonly available.
 
3.7v, 14.7WhTHE REALLY GOOD THING IS .... I bought a proper HP Smart Charger (19.5v 150W 7.7A) for my '''HP ENVY 17-3090NR 3D''' and I have slowly nursed the battery back to 100% by quickly unplugging, then plugging back in (notebook side). JUST as the plug disappears on the icon, plug it back in.
3.7v, 14.7WhTHE REALLY GOOD THING IS .... I bought a proper HP Smart Charger (19.5v 150W 7.7A) for my '''HP ENVY 17-3090NR 3D''' and I have slowly nursed the battery back to 100% by quickly unplugging, then plugging back in (notebook side). JUST as the plug disappears on the icon, plug it back in.
 
65x183mm (WxL) Thickness =On the HP Smart Charger, notebook side, the battery pack / 2center pin is 19.5v the inside barrel is 19.5v, the outside is negative.
65x183mm (WxL) Thickness =On the HP Smart Charger, notebook side, the battery pack / 2center pin is 19.5v the inside barrel is 19.5v, the outside is negative.
 
THE REALLY GOOD THING IS .... I bought a proper HP Smart Charger (19.5v 120mAh) for my ENVY 17-3090NR 3D and I have slowly nursed the battery back to 95% by quickly unplugging, then plugging back in (notebook side).JUST as the plug disappears on the icon, plug it back in.

Every time I shut down and restart, the pack gains a bit more, but still I have to nurse it back up. Maybe it will be time before I'm over 95% after a shutdown and restart. On the HP Smart Charger, notebook side, the center pin is 19.5v the inside barrel is 19.5v, the outside is negative.

All
All other chargers I have tested are 6.5v on the pin, 19.5v on the inside of the barrel. What you need if you do not want the pop up from HP is 19.5v on BOTH the pin and inside, you will not be able to game at or refreash @ 120Hz 3D (For my notebook) without the proper HP Smart Charger. You can have a higher capacity charger than specified, but '''YOU CANT GO LOWER!'''
THE REALLY GOOD THING IS .... I bought a proper HP Smart Charger (19.5v 120mAh) for my ENVY 17-3090NR 3D and I have slowly nursed the battery back to 95% by quickly unplugging, then plugging back in (notebook side).JUST as the plug disappears on the icon, plug it back in.

Every time I shut down and restart, the pack gains a bit more, but still I have to nurse it back up. Maybe it will be time before I'm over 95% after a shutdown and restart. On the HP Smart Charger, notebook side, the center pin is 19.5v the inside barrel is 19.5v, the outside is negative.

All
All other chargers I have tested are 6.5v on the pin, 19.5v on the inside of the barrel. What you need if you do not want the pop up from HP is 19.5v on BOTH the pin and inside, you will not be able to game at or refreash @ 120Hz 3D (For my notebook) without the proper HP Smart Charger. You can have a higher capacity charger than specified, but '''YOU CANT GO LOWER!'''
 
[image|1339359]
 
[image|1347333]
 
The 2 *NEW* chargers I bought are from DrLappy, who is a computer service and retail group. They dispose of older *GENUINE* inventory, I purchased 2 chargers, one slimline for travel and one big brick (TPC-DA52) that is originally sold with monitors. it has a 90° plug on the notebook side.
 
A new charger took my battery from 60% to 100% and holding. My 1st charger that went on me just quit without any warning, it did not fizzle out like this previous charger.

状态:

open

编辑: frankjward69 ,

文本:

The battery has 6 li-ion pouch cells, NO 18650 Cans in the battery pack.
 
Good thing is the pouch cells are:
 
3.7v, 14.7Wh
 
65x183mm (WxL) Thickness = the the battery pack / 2.
 
THE REALLY GOOD THING IS .... I bought a proper HP Smart Charger (19.5v 120mAh) for my ENVY 17-300NR17-3090NR 3D and I have slowly nursed the battery back to 95% by quickly unplugging, then plugging back in (notebook side).JUST as the plug disappears on the icon, plug it back in.
THE REALLY GOOD THING IS .... I bought a proper HP Smart Charger (19.5v 120mAh) for my ENVY 17-300NR17-3090NR 3D and I have slowly nursed the battery back to 95% by quickly unplugging, then plugging back in (notebook side).JUST as the plug disappears on the icon, plug it back in.
 
Every time I shut down and restart, the pack gains a bit more, but still I have to nurse it back up. Maybe it will be time before I'm over 95% after a shutdown and restart. On the HP Smart Charger, notebook side, the center pin is 19.5v the inside barrel is 19.5v, the outside is negative.
 
All other chargers I have tested are 6.5v on the pin, 19.5v on the inside of the barrel. What you need if you do not want the pop up from HP is 19.5v on BOTH the pin and inside, you will not be able to game at 120Hz 3D without the proper HP Smart Charger.
 
[image|1339359]
 
[image|1347333]
 
The 2 *NEW* chargers I bought are from DrLappy, who is a computer service and retail group. They dispose of older *GENUINE* inventory, I purchased 2 chargers, one slimline for travel and one big brick (TPC-DA52) that is originally sold with monitors. it has a 90° plug on the notebook side.
A new charger took my battery from 60% to 100% and holding. My 1st charger that went on me just quit without any warning, it did not fizzle out like this previous charger.

状态:

open

编辑: frankjward69 ,

文本:

The battery has 6 li-ion pouch cells, NO 18650 Cans in the battery pack.
 
Good thing is the pouch cells are:
 
3.7v, 14.7Wh
65x183mm (WxL) Thickness = the the battery pack / 2.
 
THE GOOD THING IS .... I bought a proper HP Smart Charger (19.5v 120mAh) for my ENVY 17-300NR 3D and I have slowly nursed65x183mm (WxL) Thickness = the the battery back to 95% by quickly unplugging, then plugging back in (notebook side).
JUST as the plug disappears on the icon, plug it back in
pack / 2.
THE GOOD THING IS .... I bought a proper HP Smart Charger (19.5v 120mAh) for my ENVY 17-300NR 3D and I have slowly nursed65x183mm (WxL) Thickness = the the battery back to 95% by quickly unplugging, then plugging back in (notebook side).
JUST as the plug disappears on the icon, plug it back in
pack / 2.
 
Every timeTHE REALLY GOOD THING IS .... I shut down and restart, the pack gainsbought a bit more, but stillproper HP Smart Charger (19.5v 120mAh) for my ENVY 17-300NR 3D and I have slowly nursed the battery back to nurse it95% by quickly unplugging, then plugging back up. Maybein (notebook side).JUST as the plug disappears on the icon, plug it will be time before I'm over 95% after a shutdown and restartback in.
Every timeTHE REALLY GOOD THING IS .... I shut down and restart, the pack gainsbought a bit more, but stillproper HP Smart Charger (19.5v 120mAh) for my ENVY 17-300NR 3D and I have slowly nursed the battery back to nurse it95% by quickly unplugging, then plugging back up. Maybein (notebook side).JUST as the plug disappears on the icon, plug it will be time before I'm over 95% after a shutdown and restartback in.
 
OnEvery time I shut down and restart, the pack gains a bit more, but still I have to nurse it back up. Maybe it will be time before I'm over 95% after a shutdown and restart. On the HP Smart Charger, notebook side, the center pin is 19.5v the inside barrel is 19.5v, the outside is negative.
OnEvery time I shut down and restart, the pack gains a bit more, but still I have to nurse it back up. Maybe it will be time before I'm over 95% after a shutdown and restart. On the HP Smart Charger, notebook side, the center pin is 19.5v the inside barrel is 19.5v, the outside is negative.
 
All other chargers I have tested are 6.5v on the pin, 19.5v on the inside of the barrel. What you need if you do not want the pop up from HP is 19.5v on BOTH the pin and inside, you will not be able to game at 120Hz 3D without the proper HP Smart Charger.
 
[image|1339359]
 
[image|1341700image|1347333]
[image|1341700image|1347333]

状态:

open

编辑: frankjward69 ,

文本:

The battery has 6 li-ion pouch cells, NO 18650 Cans in the battery pack.
 
Good thing is the pouch cells are:
 
3.7v, 14.7Wh
 
65x183mm (WxL) Thickness = the the battery pack / 2.
 
THE GOOD THING IS .... I bought a proper HP Smart Charger (19.5v 120mAh) for my ENVY 17-300NR 3D and I have slowly nursed the battery back to 95% by quickly unplugging, then plugging back in (notebook side).
 
JUST as the plug disappears on the icon, plug it back in.
 
Every time I shut down and restart, the pack gains a bit more, but still I have to nurse it back up. Maybe it will be time before I'm over 95% after a shutdown and restart.
 
On the HP Smart Charger, notebook side, the center pin is 19.5v the inside barrel is 19.5v, the outside is negative.
 
All other chargers I have tested are not powered6.5v on the pin, 19.5v on the inside of the connector, only the pin. This is whatbarrel. What you need if you do not want the pop up from HP as it does NOT haveis 19.5v on BOTH the extra power necessarypin and inside, you will not be able to run the notebook ingame at 120Hz 3D.3D without the proper HP Smart Charger.

[image|1339359]
All other chargers I have tested are not powered6.5v on the pin, 19.5v on the inside of the connector, only the pin. This is whatbarrel. What you need if you do not want the pop up from HP as it does NOT haveis 19.5v on BOTH the extra power necessarypin and inside, you will not be able to run the notebook ingame at 120Hz 3D.3D without the proper HP Smart Charger.

[image|1339359]
 
[image|1339359] [image|1341700image|1341700]
[image|1339359] [image|1341700image|1341700]

状态:

open

编辑: frankjward69 ,

文本:

The battery has 6 li-ion pouch cells, NO 18650 Cans in the battery pack.
 
Good thing is the pouch cells are:
 
3.7v, 14.7Wh
 
65x183mm (WxL) Thickness = the the battery pack / 2.
 
THE GOOD THING IS .... I bought a proper HP Smart Charger (19.5v 120mAh) for my ENVY 17-300NR 3D and I have slowly nursed the battery back to 95% by quickly unplugging, then plugging back in (notebook side).
 
JUST as the plug disappears on the icon, plug it back in.
 
Every time I shut down and restart, the pack gains a bit more, but still I have to nurse it back up. Maybe it will be time before I'm over 95% after a shutdown and restart.
 
On the HP Smart Charger, notebook side, the center pin is 19.5v the inside barrel is 19.5v, the outside is negative.
 
All other chargers I have tested are not powered on the inside of the connector, only the pin. This is what you need if you do not want the pop up from HP as it does NOT have the extra power necessary to run the notebook in 120Hz 3D.
 
[image|1339359] [image|1341700]
[image|1339359] [image|1341700]

状态:

open

编辑: Sam Goldheart (投票详情) ,

文本:

The battery has 6 li-ion pouch cells,  NO 18650 Cans in the battery pack.

Good thing is the pouch cells are:

3.7v, 14.7Wh

65x183mm (WxL) Thickness = the the battery pack / 2.

THE GOOD THING IS .... I bought a proper HP Smart Charger (19.5v 120mAh) for my ENVY 17-300NR 3D and I have slowly nursed the battery back to 95% by quickly unplugging, then plugging back in (notebook side).

JUST as the plug disappears on the icon, plug it back in.

Every time I shut down and restart, the pack gains a bit more, but still I have to nurse it back up. Maybe it will be time before I'm over 95% after a shutdown and restart.

On the HP Smart Charger, notebook side, the center pin is 19.5v the inside barrel is 19.5v, the outside is negative.

All other chargers I have tested are not powered on the inside of the connector, only the pin. This is what you need if you do not want the pop up from HP as it does NOT have the extra power necessary to run the notebook in 120Hz 3D.

[image|1339359]

状态:

deletedopen
deletedopen

编辑: iRobot ,

文本:

The battery has 6 li-ion pouch cells, NO 18650 Cans in the battery pack.
 
Good thing is the pouch cells are:
 
3.7v, 14.7Wh
 
65x183mm (WxL) Thickness = the the battery pack / 2.
 
THE GOOD THING IS .... I bought a proper HP Smart Charger (19.5v 120mAh) for my ENVY 17-300NR 3D and I have slowly nursed the battery back to 95% by quickly unplugging, then plugging back in (notebook side).
 
JUST as the plug disappears on the icon, plug it back in.
 
Every time I shut down and restart, the pack gains a bit more, but still I have to nurse it back up. Maybe it will be time before I'm over 95% after a shutdown and restart.
 
On the HP Smart Charger, notebook side, the center pin is 19.5v the inside barrel is 19.5v, the outside is negative.
 
All other chargers I have tested are not powered on the inside of the connector, only the pin. This is what you need if you do not want the pop up from HP as it does NOT have the extra power necessary to run the notebook in 120Hz 3D.
 
[image|1339359]

状态:

opendeleted
opendeleted

编辑: frankjward69 ,

文本:

The battery has 6 li-ion pouch cells, NO 18650 Cans in the battery pack.
 
Good thing is the pouch cells are:
 
3.7v, 14.7Wh
 
65x183mm (WxL) Thickness = the the battery pack / 2.
 
THE GOOD THING IS .... I bought a proper HP Smart Charger (19.5v 120mAh) for my ENVY 17-300NR 3D and I have slowly nursed the battery back to 95% by quickly unplugging, then plugging back in (notebook side).
 
JUST as the plug disappears on the icon, plug it back in.
 
Every time I shut down and restart, the pack gains a bit more, but still I have to nurse it back up. Maybe it will be time before I'm over 95% after a shutdown and restart.
 
On the HP Smart Charger, notebook side, the center pin is 19.5v the inside barrel is 19.5v, the outside is negative.
 
All other chargers I have tested are not powered on the inside of the connector, only the pin. This is what you need if you do not want the pop up from HP as it does NOT have the extra power necessary to run the notebook in 120Hz 3D.
 
[image|1339359]

状态:

open

原帖由: frankjward69 ,

文本:

The battery has 6 li-ion pouch cells,  NO 18650 Cans in the battery pack.

Good thing is the pouch cells are:

3.7v, 14.7Wh

65x183mm (WxL) Thickness = the the battery pack / 2.

THE GOOD THING IS .... I bought a proper HP Smart Charger (19.5v 120mAh) for my ENVY 17-300NR 3D and I have slowly nursed the battery back to 95% by quickly unplugging, then plugging back in (notebook side).

JUST as the plug disappears on the icon, plug it back in.

Every time I shut down and restart, the pack gains a bit more, but still I have to nurse it back up. Maybe it will be time before I'm over 95% after a shutdown and restart.

On the HP Smart Charger, notebook side, the center pin is 19.5v the inside barrel is 19.5v, the outside is negative.

All other chargers I have tested are not powered on the inside of the connector, only the pin. This is what you need if you do not want the pop up from HP as it does NOT have the extra power necessary to run the notebook in 120Hz 3D.

状态:

open