跳转到主内容
帮助

当前版本: Ben ,

文本:

Take pictures of the connectors on the board, I assume they got physically damaged.
 
Also try booting with home button extension cable and front camera unplugged, or in short plug the touch screen and display cable only.
 
This could also be caused by long screw damage, which can only be checked via microscope or someone that does micro-soldering. Basically long screw damage is where longer than usual screws go in where they shouldn't be, like the screw holes that sit on the logic board near the screen connectors.
 
You are leaving the battery unplugged before unplugging or plugging any other cables right?
 
Don't worry about long screw damage for now until you try another screen, attempt to boot with front camera and home button extension cable unplugged.
 
Looks like you have an connection issue on the screen, either the screen has gone bad (ribbon cables bent too much) or just not plugged in properly (probably not this as you already tried reseating the cables).

状态:

open

编辑: Ben ,

文本:

Take pictures of the connectors on the board, I assume they got physically damaged.
 
Also try booting with home button extension cable and front camera unplugged, or in short plug the touch screen and display cable only.
 
This could also be caused by long screw damage, which can only be checked via microscope or someone that does micro-soldering. Basically long screw damage is where longer than usual screws go in where they shouldn't be, like the screw holes that sit on the logic board near the screen connectors.
 
You are leaving the battery unplugged before unplugging or plugging any other batteriescables right?
You are leaving the battery unplugged before unplugging or plugging any other batteriescables right?
 
Don't worry about long screw damage for now until you try another screen, attempt to boot with front camera and home button extension cable unplugged.

状态:

open

编辑: Ben ,

文本:

Take pictures of the connectors on the board, I assume they got physically damaged.
 
Also try booting with home button extension cable and front camera unplugged, or in short plug the touch screen and display cable only.
 
This could also be caused by long screw damage, which can only be checked via microscope or someone that does micro-soldering. Basically long screw damage is where longer than usual screws go in where they shouldn't be, like the screw holes that sit on the logic board near the screen connectors.
 
You are leaving the battery unplugged before unplugging or plugging any other batteries right?
 
Don't worry about long screw damage for now until you try another screen, attempt to boot with front camera and home button extension cable unplugged.
Don't worry about long screw damage for now until you try another screen, attempt to boot with front camera and home button extension cable unplugged.

状态:

open

编辑: Ben ,

文本:

Take pictures of the connectors on the board, I assume they got physically damaged.
 
Also try booting with home button extension cable and front camera unplugged, or in short plug the touch screen and display cable only.
 
This could also be caused by long screw damage, which can only be checked via microscope or someone that does micro-soldering. Basically long screw damage is where longer than usual screws go in where they shouldn't be, like the screw holes that sit on the logic board near the screen connectors.
 
You are unpluggingleaving the battery unplugged before unplugging or plugging any other batteries right?

Don't worry about long screw damage for now until you try another screen, attempt to boot with front camera and home button unplugged.
You are unpluggingleaving the battery unplugged before unplugging or plugging any other batteries right?

Don't worry about long screw damage for now until you try another screen, attempt to boot with front camera and home button unplugged.

状态:

open

编辑: Ben ,

文本:

Take pictures of the connectors on the board, I assume they got physically damagedamaged.
Take pictures of the connectors on the board, I assume they got physically damagedamaged.
 
Also try booting with home button extension cable and front camera unplugged, or in short plug the touch screen and display cable only.
 
This could also be caused by long screw damage, which can only be checked via microscope or someone that does micro-soldering. Basically long screw damage is where longer than usual screws go in where they shouldn't be, like the screw holes that sit on the logic board near the screen connectors.
 
You are unplugging the battery before unplugging or plugging any other batteries right?

状态:

open

原帖由: Ben ,

文本:

Take pictures of the connectors on the board, I assume they got physically damage.

Also try booting with home button extension cable and front camera unplugged, or in short plug the touch screen and display cable only.

This could also be caused by long screw damage, which can only be checked via microscope or someone that does micro-soldering. Basically long screw damage is where longer than usual screws go in where they shouldn't be, like the screw holes that sit on the logic board near the screen connectors.

状态:

open