跳转到主内容
帮助

当前版本: J W ,

文本:

These instructions are for vívoactive HR (4.00 firmware) stuck on Completing Setup screen on Garmin Connect Mobile (GCM) for iOS.
 
# Long press right button on vívoactive HR to open menu, then select _Settings_, then select _Bluetooth_.
# If a menu shows _Status: Connected_, then vívoactive HR is already paired to a device.
## On iOS device, open Settings app, then select _Bluetooth_, then check if vívoactive HR is listed under _My Devices_ If its status is _Connected_, then you're already paired with the vívoactive HR.
## Try adding the device again in GCM app.
## If it still fails to be added in GCM, go back to the Bluetooth Settings in iOS, then select the info (i) button for vívoactive HR, then select _Forget This Device_.
# Long press left button on vívoactive HR and select _Power Off_.
# Once powered off, press left button on vívoactive HR again to power it on.
# Once it powers back on, long press right button on vívoactive HR to open menu, then select _Settings_, then select _Bluetooth_, then _Pair Mobile Device_.
# On GCM app, try adding the device again. iOS device should prompt for a 6 digit PIN that is displayed on the vívoactive HR display. After you enter this PIN, it should only take a few moments to finalize pairing the device.
NOTE: You may want to try pairing away from other devices as they may cause interference.

状态:

open

原帖由: J W ,

文本:

These instructions are for vívoactive HR (4.00 firmware) stuck on Completing Setup screen on Garmin Connect Mobile (GCM) for iOS.

# Long press right button on vívoactive HR to open menu, then select _Settings_, then select _Bluetooth_.
# If a menu shows _Status: Connected_, then vívoactive HR is already paired to a device.
## On iOS device, open Settings app, then select _Bluetooth_, then check if vívoactive HR is listed under _My Devices_ If its status is _Connected_, then you're already paired with the vívoactive HR.
## Try adding the device again in GCM app.
## If it still fails to be added in GCM, go back to the Bluetooth Settings in iOS, then select the info (i) button for vívoactive HR, then select _Forget This Device_.
# Long press left button on vívoactive HR and select _Power Off_.
# Once powered off, press left button on vívoactive HR again to power it on.
# Once it powers back on, long press right button on vívoactive HR to open menu, then select _Settings_, then select _Bluetooth_, then _Pair Mobile Device_.
# On GCM app, try adding the device again. iOS device should prompt for a 6 digit PIN that is displayed on the vívoactive HR display. After you enter this PIN, it should only take a few moments to finalize pairing the device.

状态:

open