跳转到主内容

修复你的物品

维修的权力

配件 & 工具

帮助

当前版本: Nick ,

文本:

On Epson printers without an LCD, this pattern generally means that the waste ink tank is full. LCD models have a on screen error code.
 
If you want to make sure on the non-LCD models, check Epson Status Monitor for the following (or a similar) error: '''Parts inside your printer require replacement'''.
 
The best way to fix this problem is to take the waste ink out of the printer, since it’s a burden of a job on these that also creates a mess. Get a large bottle and a cutoff valve to build a tank, and connect it to the printer with a vinyl tube and a cutoff valve so you do not have to rely on the saturated internal pad. You can also buy pre-assembled ones as well.
The best way to fix this problem is to take the waste ink out of the printer, since it’s a burden of a job on these that also creates a mess. Get a large bottle and a cutoff valve to build a tank, and connect it to the printer with a vinyl tube and a cutoff valve so you do not have to rely on the saturated internal pad. You can also buy pre-assembled ones as well.
 
The other problem is the counter still needs to be reset. While the Epson tool has leasked for most old models, it has not yet for many newer ones. The official tool can be found [https://epson.com/Support/wa00819|here]. For printers without an official tool (or a limited run reset), you will need [https://www.wic.support/download/|WIC Reset (paid)].
 
Some of the older printers that predate the 88/69/68 cartridges have a internal reset command built into the printer and do not need a Windows reset where you hold the paper and ink buttons and then press the power buttons. None of the modern ones have it, but it isn’t consistent on which ones support it so software is a safer option unless you see it work again. The last models this is known to work on use the T048 cartridges.

状态:

open

编辑: Nick ,

文本:

On Epson printersprinters without an LCD, this pattern generally means that the waste ink tank is full. Non LCD models usually indicate that problem with this pattern. The LCD models say something to the effect of the waste ink pad being fullhave a on screen error code.
On Epson printersprinters without an LCD, this pattern generally means that the waste ink tank is full. Non LCD models usually indicate that problem with this pattern. The LCD models say something to the effect of the waste ink pad being fullhave a on screen error code.
 
If you want to make sure on the non-LCD models, check Epson Status Monitor for the following error (or a similar error)similar) error: '''Parts inside your printer require replacement'''.
If you want to make sure on the non-LCD models, check Epson Status Monitor for the following error (or a similar error)similar) error: '''Parts inside your printer require replacement'''.
 
The best way to fix this problem is to take the waste ink out of the printer, since it’s a burden of a job on these that also creates a mess. Get a large bottle,bottle and a cutoff valve to build a tank, and vinyl tubing in place ofconnect it to the (now full)printer so you do not have to rely on the saturated internal waste ink pad orpad. You can also buy one that's pre-built; either is fine. It isn't worth saving the pads because the process is difficult and messypre-assembled ones as well.
The best way to fix this problem is to take the waste ink out of the printer, since it’s a burden of a job on these that also creates a mess. Get a large bottle,bottle and a cutoff valve to build a tank, and vinyl tubing in place ofconnect it to the (now full)printer so you do not have to rely on the saturated internal waste ink pad orpad. You can also buy one that's pre-built; either is fine. It isn't worth saving the pads because the process is difficult and messypre-assembled ones as well.
 
The other problem is the counter still needs to be reset. While Epson has athe Epson tool has leasked for *most* older printers, some of the new models don't have anmost old models, it has not yet for many newer ones. The official tool, whichtool can be found [https://epson.com/Support/wa00819|here]. For printers without an official reset from Epsontool (or in some cases, reset more then oncea limited run reset), you will need to use a 3rd party tool (typically paid)[https://www.wic.support/download/|WIC Reset (paid)].
The other problem is the counter still needs to be reset. While Epson has athe Epson tool has leasked for *most* older printers, some of the new models don't have anmost old models, it has not yet for many newer ones. The official tool, whichtool can be found [https://epson.com/Support/wa00819|here]. For printers without an official reset from Epsontool (or in some cases, reset more then oncea limited run reset), you will need to use a 3rd party tool (typically paid)[https://www.wic.support/download/|WIC Reset (paid)].
 
Some of the older printers that predate the 88/69/68 cartridges have a internal reset command built into the printer and do not need a Windows resetreset where you hold the paper and ink buttons and then press the power buttons. None of the modern ones have it, but it and the olderisn’t consistent on which ones can be a mixed bag but all support theit so software methodis a safer option unless you see it work again. The last models this is known printers to allow for a hardware arework on use the T048 modelscartridges.
Some of the older printers that predate the 88/69/68 cartridges have a internal reset command built into the printer and do not need a Windows resetreset where you hold the paper and ink buttons and then press the power buttons. None of the modern ones have it, but it and the olderisn’t consistent on which ones can be a mixed bag but all support theit so software methodis a safer option unless you see it work again. The last models this is known printers to allow for a hardware arework on use the T048 modelscartridges.

状态:

open

编辑: Nick ,

文本:

On Epson printers, this pattern generally means that the waste ink tank is full. Non LCD models usually indicate that problem with this pattern. The LCD models say something to the effect of the waste ink pad being full.
 
If you want to make sure on the non-LCD models, check Epson Status Monitor for the following error (or a similar error): '''Parts inside your printer require replacement'''.
 
The best way to fix this problem is to take a large bottle, a cutoff valve and vinyl tubing in place of the (now full) internal waste ink pad or buy one that's pre-built; either is fine. It isn't worth saving the pads because the process is difficult and messy.
 
The other problem is the counter still needs to be reset. While Epson has a tool for *most* older printers, some of the new models don't have an official tool, which can be found [https://epson.com/Support/wa00819|here]. For printers without an official reset from Epson (or in some cases, reset more then once), you will need to use a 3rd party tool, which often cost moneytool (typically paid).
The other problem is the counter still needs to be reset. While Epson has a tool for *most* older printers, some of the new models don't have an official tool, which can be found [https://epson.com/Support/wa00819|here]. For printers without an official reset from Epson (or in some cases, reset more then once), you will need to use a 3rd party tool, which often cost moneytool (typically paid).
 
Some of the older printers that predate the 88/69/68 cartridges have a internal reset command built into the printer and do not need a Windows reset. None of the modern ones have it and the older ones can be a mixed bag but all support the software method. The last known printers to allow for a hardware are the T048 models.

状态:

open

编辑: Nick ,

文本:

On Epson printers, this pattern generally means that the waste ink tank is full. Non LCD models usually indicate that problem with this pattern, whilepattern. The LCD models say something to the effect of the waste ink pad being full.
On Epson printers, this pattern generally means that the waste ink tank is full. Non LCD models usually indicate that problem with this pattern, whilepattern. The LCD models say something to the effect of the waste ink pad being full.
 
If you want to make sure on non LCD models like yoursthe non-LCD models, check Epson Status Monitor for the following errorerror (or a similar error): '''Parts inside your printer require replacement'''.
If you want to make sure on non LCD models like yoursthe non-LCD models, check Epson Status Monitor for the following errorerror (or a similar error): '''Parts inside your printer require replacement'''.
 
The best way to fix this problem is to take a large bottle, a cutoff valve and vinyl tubing in place of the (now full) internal waste ink pad. Taking it apartpad or buy one that's pre-built; either is difficult and messy, andfine. It isn't worth saving the effort. The other problempads because the process is the counter still needs to be reset. While Epson has a tool for *most* older printers, some of the new models don't have an official tool, which can be found [https://epson.com/Support/wa00819|here]. For printers without an official reset from Epson (or in some cases, reset more then once), you will need to use a 3rd party tool, which often cost moneydifficult and messy.
The best way to fix this problem is to take a large bottle, a cutoff valve and vinyl tubing in place of the (now full) internal waste ink pad. Taking it apartpad or buy one that's pre-built; either is difficult and messy, andfine. It isn't worth saving the effort. The other problempads because the process is the counter still needs to be reset. While Epson has a tool for *most* older printers, some of the new models don't have an official tool, which can be found [https://epson.com/Support/wa00819|here]. For printers without an official reset from Epson (or in some cases, reset more then once), you will need to use a 3rd party tool, which often cost moneydifficult and messy.
 
SomeThe other problem is the counter still needs to be reset. While Epson has a tool for *most* older printers, some of the new models don't have an official tool, which can be found [https://epson.com/Support/wa00819|here]. For printers without an official reset from Epson (or in some cases, reset more then once), you will need to use a 3rd party tool, which often cost money.

Some
of the older printers that predate the 88/69/68 cartridges have a internal reset command built into the printer that you initiate through the buttons on the front panel of the printer that areand do not dependent onneed a softwareWindows reset. Generally speaking, newer models no longerNone of the modern ones have this optionit and software is required to do the resetolder ones can be a mixed bag but all support the software method. The last known printers to allow this software free reset arefor a hardware are the T048 models.
SomeThe other problem is the counter still needs to be reset. While Epson has a tool for *most* older printers, some of the new models don't have an official tool, which can be found [https://epson.com/Support/wa00819|here]. For printers without an official reset from Epson (or in some cases, reset more then once), you will need to use a 3rd party tool, which often cost money.

Some
of the older printers that predate the 88/69/68 cartridges have a internal reset command built into the printer that you initiate through the buttons on the front panel of the printer that areand do not dependent onneed a softwareWindows reset. Generally speaking, newer models no longerNone of the modern ones have this optionit and software is required to do the resetolder ones can be a mixed bag but all support the software method. The last known printers to allow this software free reset arefor a hardware are the T048 models.

状态:

open

编辑: Nick ,

文本:

On Epson printers, this generally means that the waste ink tank is full. Non LCD models usually indicate that problem with this pattern, while LCD models say something to the effect of the waste ink pad being full.
 
If you want to make sure on non LCD models like yours, check Epson Status Monitor for the following error: '''Parts inside your printer require replacement'''.
 
The best way to fix this problem is to take a large bottle, a cutoff valve and vinyl tubing in place of the (now full) internal waste ink pad. Taking it apart is difficult and messy, and isn't worth the effort. The other problem is the counter still needs to be reset. While Epson has a tool for *most* older printers, some of the new models don't have an official tool, which can be found [https://epson.com/Support/wa00819|here]. For printers without an official resetreset from Epson (or in some cases, reset more then once), you will need to use a 3rd party tool, which often cost money.
The best way to fix this problem is to take a large bottle, a cutoff valve and vinyl tubing in place of the (now full) internal waste ink pad. Taking it apart is difficult and messy, and isn't worth the effort. The other problem is the counter still needs to be reset. While Epson has a tool for *most* older printers, some of the new models don't have an official tool, which can be found [https://epson.com/Support/wa00819|here]. For printers without an official resetreset from Epson (or in some cases, reset more then once), you will need to use a 3rd party tool, which often cost money.
Some of the older printers that predate the 88/69/68 cartridges have a reset command built into the printer that you initiate through the buttons on the front panel of the printer that are not dependent on a software reset. Generally speaking, newer models no longer have this option and software is required to do the reset. The last known printers to allow this software free reset are the T048 models.

状态:

open

编辑: Nick ,

文本:

On Epson printers, this generally means that yourthe waste ink tank is full, as this is how Epson generally communicatesfull. Non LCD models usually indicate that problem with this pattern, while LCD models say something to the effect of the waste ink pad being full.
If you want to make sure
on non LCD equipped models like yours, check Epson Status Monitor for the Stylus Photo 1400. If you see an error on your screen that more or less saysfollowing error: '''Parts inside your printer require replacement''', this is the easiest way to confirm this is a waste ink related errorreplacement'''.
On Epson printers, this generally means that yourthe waste ink tank is full, as this is how Epson generally communicatesfull. Non LCD models usually indicate that problem with this pattern, while LCD models say something to the effect of the waste ink pad being full.
If you want to make sure
on non LCD equipped models like yours, check Epson Status Monitor for the Stylus Photo 1400. If you see an error on your screen that more or less saysfollowing error: '''Parts inside your printer require replacement''', this is the easiest way to confirm this is a waste ink related errorreplacement'''.
 
The best way to fix this problem is to take a large bottle, a cutoff valve and some tubing to takevinyl tubing in place of the (now full) internal waste ink away frompad. Taking it apart is difficult and messy, and isn't worth the printer itself as thiseffort. The other problem is possible on the counter still needs to be reset. While Epson printers; resetting the printer withhas a full pad isn't a good idea sincetool for *most* older printers, some of the new models don't have an official tool, which can be found [https://epson.com/Support/wa00819|here]. For printers without an official reset, you may overdo this and leak ink everywhere. Withwill need to use a 3rd party tool, which often cost money.
Some of the older printers
that being said,predate the waste ink still needs to be88/69/68 cartridges have a reset once you convertcommand built into the printer. On some modelsprinter that you can do thisinitiate through the controlbuttons on the front panel but generally speaking printersof the printer that are made after the T048 era requirenot dependent on a software reset. Generally speaking, newer models no longer have this be done in software. You will also needoption and software is required to regularly checkdo the reset. The last known printers to allow this waste ink bottle and empty it once in a while, so it should be clear so you can check it quicklysoftware free reset are the T048 models.
The best way to fix this problem is to take a large bottle, a cutoff valve and some tubing to takevinyl tubing in place of the (now full) internal waste ink away frompad. Taking it apart is difficult and messy, and isn't worth the printer itself as thiseffort. The other problem is possible on the counter still needs to be reset. While Epson printers; resetting the printer withhas a full pad isn't a good idea sincetool for *most* older printers, some of the new models don't have an official tool, which can be found [https://epson.com/Support/wa00819|here]. For printers without an official reset, you may overdo this and leak ink everywhere. Withwill need to use a 3rd party tool, which often cost money.
Some of the older printers
that being said,predate the waste ink still needs to be88/69/68 cartridges have a reset once you convertcommand built into the printer. On some modelsprinter that you can do thisinitiate through the controlbuttons on the front panel but generally speaking printersof the printer that are made after the T048 era requirenot dependent on a software reset. Generally speaking, newer models no longer have this be done in software. You will also needoption and software is required to regularly checkdo the reset. The last known printers to allow this waste ink bottle and empty it once in a while, so it should be clear so you can check it quicklysoftware free reset are the T048 models.

状态:

open

编辑: Nick ,

文本:

On Epson printers, this generally means that your waste ink tank is full, as this is how Epson generally communicates this on non LCD equipped models like the Stylus Photo 1400. If you see an error on your screen that more or less says '''Parts inside your printer require replacement''', this is the easiest way to confirm this is a waste ink related error.
 
The best way to fix this problem is to take a large bottle, a cutoff valve and some tubing to take the waste ink away from the printer itself as this is possible on the Epson printers. You will need to resetprinters; resetting the printer with a full pad isn't a good idea since you may overdo this and leak ink everywhere. With that being said, the waste ink counterstill needs to be reset once you do this, thoughconvert the printer. On some models you can do this through the control panel but generally speaking printers that are made after the T048 era require this be done in software. You will also need to regularly check this waste ink bottle and empty it once in a while, so it should be clear so you can check it quickly.
The best way to fix this problem is to take a large bottle, a cutoff valve and some tubing to take the waste ink away from the printer itself as this is possible on the Epson printers. You will need to resetprinters; resetting the printer with a full pad isn't a good idea since you may overdo this and leak ink everywhere. With that being said, the waste ink counterstill needs to be reset once you do this, thoughconvert the printer. On some models you can do this through the control panel but generally speaking printers that are made after the T048 era require this be done in software. You will also need to regularly check this waste ink bottle and empty it once in a while, so it should be clear so you can check it quickly.

状态:

open

原帖由: Nick ,

文本:

On Epson printers, this generally means that your waste ink tank is full, as this is how Epson generally communicates this on non LCD equipped models like the Stylus Photo 1400. If you see an error on your screen that more or less says '''Parts inside your printer require replacement''', this is the easiest way to confirm this is a waste ink related error.

The best way to fix this problem is to take a large bottle, a cutoff valve and some tubing to take the waste ink away from the printer itself as this is possible on the Epson printers. You will need to reset the waste ink counter once you do this, though. On some models you can do this through the control panel but generally speaking printers that are made after the T048 era require this be done in software. You will also need to regularly check this waste ink bottle and empty it once in a while, so it should be clear so you can check it quickly.

状态:

open