跳转到主内容
帮助

当前版本: Richard Suovanen ,

文本:

Alex, there are a couple of videos on youtube that may help you with that. http://www.youtube.com/watch?v=HTMSRfEqWAU is one of them as a rule of thumb I would get a can of air duster and try blowing out the whole laser assembly including the gears and track. I'd also clean the center spindle (with rubbing alcohol on a q-tip) and make sure the discs are sitting flat. Just in case you need to replace the drive here are the instructions [guide|1591guide|1589] good luck and happy gaming. Keep those legacy devices going....:)
Alex, there are a couple of videos on youtube that may help you with that. http://www.youtube.com/watch?v=HTMSRfEqWAU is one of them as a rule of thumb I would get a can of air duster and try blowing out the whole laser assembly including the gears and track. I'd also clean the center spindle (with rubbing alcohol on a q-tip) and make sure the discs are sitting flat. Just in case you need to replace the drive here are the instructions [guide|1591guide|1589] good luck and happy gaming. Keep those legacy devices going....:)

状态:

open

编辑: oldturkey03 ,

文本:

OkatAlex, there are a couple of videos on youtube that may help you with that. http://www.youtube.com/watch?v=HTMSRfEqWAU is one of them as a rule of thumb I would get a can of air duster and try blowing out the whole laser assembly including the gears and track. I'd also clean the center spindle (with rubbing alcohol on a q-tip) and make sure the discs are sitting flat. Just in case you need to replace the drive here are the instructions [guide|1591] good luck and happy gaming. Keep those legacy devices going....:)
OkatAlex, there are a couple of videos on youtube that may help you with that. http://www.youtube.com/watch?v=HTMSRfEqWAU is one of them as a rule of thumb I would get a can of air duster and try blowing out the whole laser assembly including the gears and track. I'd also clean the center spindle (with rubbing alcohol on a q-tip) and make sure the discs are sitting flat. Just in case you need to replace the drive here are the instructions [guide|1591] good luck and happy gaming. Keep those legacy devices going....:)

状态:

open

编辑: oldturkey03 ,

文本:

Okat there are a couple of videos on youtube thst mauthat may help you with that. http://www.youtube.com/watch?v=HTMSRfEqWAU is one of them as a rule of thumb I would get a can of air duster and try blowing out the whole laser assembly including the gears and track. I'd also clean the center spindle (with rubbing alcohol on a q-tip) and make sure the discs are sitting flat. Just in case you need to replace the drive here are the instructions [guide|1591] good luck and happy gaming. Keep those legacy devices going....:)
Okat there are a couple of videos on youtube thst mauthat may help you with that. http://www.youtube.com/watch?v=HTMSRfEqWAU is one of them as a rule of thumb I would get a can of air duster and try blowing out the whole laser assembly including the gears and track. I'd also clean the center spindle (with rubbing alcohol on a q-tip) and make sure the discs are sitting flat. Just in case you need to replace the drive here are the instructions [guide|1591] good luck and happy gaming. Keep those legacy devices going....:)

状态:

open

原帖由: oldturkey03 ,

文本:

Okat there are a couple of videos on youtube thst mau help you with that. http://www.youtube.com/watch?v=HTMSRfEqWAU is one of them as a rule of thumb I would get a can of air duster and try blowing out the whole laser assembly including the gears and track. I'd also clean the center spindle (with rubbing alcohol on a q-tip) and make sure the discs are sitting flat. Just in case you need to replace the drive here are the instructions [guide|1591] good luck and happy gaming. Keep those legacy devices going....:)

状态:

open