跳转到主内容
帮助

当前版本: Matvey Draevich ,

标题:

My MacBook don't turn on, only get Beep every 5 sec interval

文本:

Hello, help me please!

A few days ago I bought a used MacBook Pro 13" (mid 2010).

On the second day I used my Mac too heavily, so it led to overheating. I closed lid, put Mac on the table and after 20 min I returned and tried to start it. But it didn't turn on. There wasn't a start signal and the screen was dark, only a beep with an interval 5 sec.

On the next day I turned on my Mac without problems, but after work I closed lid and the problem repeated itself.

Sometimes after I can start the Mac without problems, but at the last time it completely stopped. And now I'm getting a beep with an interval 5 sec again.

I tried to reset NVRAM & SMC, but without any effect.

I dismantled Mac and my opinion the problem is the video card is damaged because of overheating. So I want to try solder video card.

So, what is your opinion of this problem? Am I right, that problem in video card?

And please, can you tell me:

Did they use lead free or lead solder on these MacBooks?

Can you tell me solder temperature?

I will be grateful for the answer

=== Update (07/13/2017) ===

I forget to add, there is no problem with the RAM as I tried a different set of modules,

I also tried to clean socket, but no effect, so I suggested, that problem in other component.

设备:

MacBook Pro 13" Unibody Mid 2010

状态:

open

已接受的回答:

412613

编辑: Dan ,

标题:

My MacBook don't turn on, only get Beep every 5 sec interval

文本:

Hello, help me please!
 
A few days ago I bought a used MacBook Pro 13" (mid 2010).
 
On the second day I used my Mac too heavily, so it led to overheating. I closed lid, put Mac on the table and after 20 min I returned and tried to start it. But it didn't turn on. There wasn't a start signal and the screen was dark, only a beep with an interval 5 sec.
 
On the next day I turned on my Mac without problems, but after work I closed lid and the problem repeated itself.
 
Sometimes after I can start the Mac without problems, but at the last time it completely stopped. And now I'm getting a beep with an interval 5 sec again.
 
I tried to reset NVRAM & SMC, but without any effect.
 
I dismantled Mac and my opinion the problem is the video card is damaged because of overheating. So I want to try solder video card.
 
So, what is your opinion of this problem? Am I right, that problem in video card?
 
And please, can you tell me:
 
Did they use lead free or lead solder on these MacBooks?
 
Can you tell me solder temperature?
 
I will be grateful for the answer
 
=== Update (07/13/2017) ===
 
I forget to add, that there areis no problems in RAM,problem with the RAM as I try to addtried a different available straps RAM, tryset of modules,

I also tried
to clean socket, but no: no effect, so I suggested, that problem in other componentcomponent.
I forget to add, that there areis no problems in RAM,problem with the RAM as I try to addtried a different available straps RAM, tryset of modules,

I also tried
to clean socket, but no: no effect, so I suggested, that problem in other componentcomponent.

设备:

MacBook Pro 13" Unibody Mid 2010

状态:

open

编辑: Matvey Draevich ,

标题:

My MacBook don't turn on, only get Beep every 5 sec interval

文本:

Hello, help me please!
 
A few days ago I bought a used MacBook Pro 13" (mid 2010).
A few days ago I bought a used MacBook Pro 13" (mid 2010).
 
On the second day I used my Mac too heavily, so it led to overheating. I closed lid, put Mac on the table and after 20 min I returned and tried to start it. But it didn't turn on. There wasn't a start signal and the screen was dark, only a beep with an interval 5 sec.
On the second day I used my Mac too heavily, so it led to overheating. I closed lid, put Mac on the table and after 20 min I returned and tried to start it. But it didn't turn on. There wasn't a start signal and the screen was dark, only a beep with an interval 5 sec.
 
On the next day I turned on my Mac without problems, but after work I closed lid and the problem repeated itself.
On the next day I turned on my Mac without problems, but after work I closed lid and the problem repeated itself.
 
Sometimes after I can start the Mac without problems, but at the last time it completely stopped. And now I'm getting a beep with an interval 5 sec again.
Sometimes after I can start the Mac without problems, but at the last time it completely stopped. And now I'm getting a beep with an interval 5 sec again.
 
I tried to reset NVRAM & SMC, but without any effect.
I tried to reset NVRAM & SMC, but without any effect.
 
I dismantled Mac and my opinion the problem is the video card is damaged because of overheating. So I want to try solder video card.
 
So, what is your opinion of this problem? Am I right, that problem in video card?
 
And please, can you tell me:
And please, can you tell me:
 
Did they use lead free or lead solder on these MacBooks?
 
Can you tell me solder temperature?
 
I will be grateful for the answer
 
=== Update (07/13/2017) ===
 
I forget to add, that there are no problems in RAM, I try to add different available straps RAM, try to clean socket, but no: no effect, so I suggested, that problem in other component

设备:

MacBook Pro 13" Unibody Mid 2010

状态:

open

编辑: Dan ,

标题:

My MacBook don't turn on, only audio sygnals with interval 5get Beep every 5 sec interval
My MacBook don't turn on, only audio sygnals with interval 5get Beep every 5 sec interval

文本:

Hello, help me pleaseplease!
Hello, help me pleaseplease!
 
SomeA few days beforeago I buy notbought a newused MacBook Pro 1313" (mid 2010) from other hands. On the second day I used my Mac too much time, so it led to overheating. I closed cover, put Mac on the table and after 20 min I returned and tried to start it. But it didn't turn on. There wasn't a start sygnal and any actions on screen, only audio sygnals with interval 5 sec like BEEP. On the next day I turned on my Mac without problems, but after work I closed cover and the problem repeated itself. Some times after this I start Mac without problems, but at the last time it completely stopped. Ptoblem is such as at first time: audio sygnals with interval 5 sec. I try to reset NVRAM, SMC, but without any effect. I dismantled Mac and my opinion in problem that video card is damaged because of overheating. So I want to try solder video card.2010).
SomeA few days beforeago I buy notbought a newused MacBook Pro 1313" (mid 2010) from other hands. On the second day I used my Mac too much time, so it led to overheating. I closed cover, put Mac on the table and after 20 min I returned and tried to start it. But it didn't turn on. There wasn't a start sygnal and any actions on screen, only audio sygnals with interval 5 sec like BEEP. On the next day I turned on my Mac without problems, but after work I closed cover and the problem repeated itself. Some times after this I start Mac without problems, but at the last time it completely stopped. Ptoblem is such as at first time: audio sygnals with interval 5 sec. I try to reset NVRAM, SMC, but without any effect. I dismantled Mac and my opinion in problem that video card is damaged because of overheating. So I want to try solder video card.2010).
 
SO, can you comment your opinion of this problem? AmOn the second day I right, that problem in video card?used my Mac too heavily, so it led to overheating. I closed lid, put Mac on the table and after 20 min I returned and tried to start it. But it didn't turn on. There wasn't a start signal and the screen was dark, only a beep with an interval 5 sec.
SO, can you comment your opinion of this problem? AmOn the second day I right, that problem in video card?used my Mac too heavily, so it led to overheating. I closed lid, put Mac on the table and after 20 min I returned and tried to start it. But it didn't turn on. There wasn't a start signal and the screen was dark, only a beep with an interval 5 sec.
 
and please, can you tell me: they use lead free or lead solderOn the next day I turned on these Macbooks?my Mac without problems, but after work I closed lid and the problem repeated itself.
and please, can you tell me: they use lead free or lead solderOn the next day I turned on these Macbooks?my Mac without problems, but after work I closed lid and the problem repeated itself.
 
and pleaseSometimes after I can start the Mac without problems, but at the last time it completely stopped. And now I'm getting a beep with an interval 5 sec again.

I tried to reset NVRAM & SMC, but without any effect.

I dismantled Mac and my opinion the problem is the video card is damaged because of overheating. So I want to try solder video card.

So, what is your opinion of this problem? Am I right, that problem in video card?

And please, can you tell me:

Did they use lead free or lead solder on these MacBooks?
Can you
tell me solder temperature of thistemperature?
and pleaseSometimes after I can start the Mac without problems, but at the last time it completely stopped. And now I'm getting a beep with an interval 5 sec again.

I tried to reset NVRAM & SMC, but without any effect.

I dismantled Mac and my opinion the problem is the video card is damaged because of overheating. So I want to try solder video card.

So, what is your opinion of this problem? Am I right, that problem in video card?

And please, can you tell me:

Did they use lead free or lead solder on these MacBooks?
Can you
tell me solder temperature of thistemperature?
 
I will be grateful for the answer

设备:

MacBook Pro 13" Unibody Mid 2010

状态:

open

原帖由: Matvey Draevich ,

标题:

My MacBook don't turn on, only audio sygnals with interval 5 sec

文本:

Hello, help me please

Some days before I buy not a new MacBook Pro 13 (mid 2010) from other hands. On the second day I used my Mac too much time, so it led to overheating. I closed cover, put Mac on the table and after 20 min I returned and tried to start it. But it didn't turn on. There wasn't a start sygnal and any actions on screen, only audio sygnals with interval 5 sec like BEEP. On the next day I turned on my Mac without problems, but after work I closed cover and the problem repeated itself. Some times after this I start Mac without problems, but at the last time it completely stopped. Ptoblem is such as at first time: audio sygnals with interval 5 sec. I try to reset NVRAM, SMC, but without any effect. I dismantled Mac and my opinion in problem that video card is damaged because of overheating. So I want to try solder video card.

SO, can you comment your opinion of this problem? Am I right, that problem in video card?

and please, can you tell me: they use lead free or lead solder on these Macbooks?

and please tell me solder temperature of this?

I will be grateful for the answer

设备:

MacBook Pro 13" Unibody Mid 2010

状态:

open