跳转到主内容
帮助

当前版本: jayeff ,

文本:

Hi,
 
As you know water and electronics and electricity are not a good mix.
 
''The minerals in the water (all water except distilled water) cause corrosion and water being a good conductor provides circuit paths for the electricity which were not in the phone's operating design and could damage the components. The corrosion process starts straight away''
 
''First '''do not turn on your phone''' and then you need to with the phone turned off, '''remove the battery as soon as possible''' from the phone'' to minimize further damage.''
 
Then you need to dis-assemble the rest of the phone and clean ''all the affected parts'' using '''Isopropyl Alcohol 90%+''' to remove all traces of corrosion and water. Do not use "rubbing alcohol" as in some cases this is only 70% and is not as effective. If you do check the label to verify the amount
 
Here is a link that describes the process.
 
[[Electronics Water Damage]]
 
You ''may'' have to replace the battery as it is very hard to recover a battery from water damage.
 
As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the board.
 
Hopefully after you have done all this the phone ''might'' possibly work correctly again.
 
Here is a link to the ifixit guide(s) for repairing your phone.
 
[[Topic:LG G5]]
 
If this process seems too daunting, take your phone to a reputable, professional mobile phone repair service experienced in water damage repair and ask for a quote for a repair. If you decide to do this,'' do it sooner than later''.
If this process seems too daunting, take your phone to a reputable, professional mobile phone repair service experienced in water damage repair and ask for a quote for a repair. If you decide to do this,'' do it sooner than later''.

状态:

open

编辑: jayeff ,

文本:

Hi,
 
As you know water and electronics and electricity are not a good mix.
 
''The minerals in the water (all water except distilled water) causescause corrosion and water being a good conductor provides circuit paths for the electricity which were not in the phone's operating design and could damage the components. The corrosion process starts straight away''
''The minerals in the water (all water except distilled water) causescause corrosion and water being a good conductor provides circuit paths for the electricity which were not in the phone's operating design and could damage the components. The corrosion process starts straight away''
 
''First '''do not turn on your phone''' and then you need to with the phone turned off, '''remove the battery as soon as possible''' from the phone'' to minimize further damage.''
 
Then you need to dis-assemble the rest of the phone and clean ''all the affected parts'' using '''Isopropyl Alcohol 90%+''' to remove all traces of corrosion and water. Do not use "rubbing alcohol" as in some cases this is only 70% and is not as effective. If you do check the label to verify the amount
 
Here is a link that describes the process.
 
[[Electronics Water Damage]]
 
You ''may'' have to replace the battery as it is very hard to recover a battery from water damage.
 
As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the board.
 
Hopefully after you have done all this the phone ''might'' possibly work correctly again.
 
Here is a link to the ifixit guide(s) for repairing your phone.
 
[[Topic:LG G5]]
 
If this process seems too daunting, take your phone to a reputable, professional mobile phone repair service and ask for a quote for a repair. If you decide to do this,'' do it sooner than later''.

状态:

open

编辑: jayeff ,

文本:

Hi,
 
As you know water and electronics and electricity are not a good mix.
 
''The minerals in the water (all water except distilled water) causes corrosion and provides circuit paths for the electricity which were not in the phone's operating design and could damage the components. The corrosion process starts straight away''
''The minerals in the water (all water except distilled water) causes corrosion and provides circuit paths for the electricity which were not in the phone's operating design and could damage the components. The corrosion process starts straight away''
 
''First '''do not turn on your phone''' and then you need to with the phone turned off, '''remove the battery as soon as possible''' from the phone'' to minimize further damage.''
 
Then you need to dis-assemble the rest of the phone and clean ''all the affected parts'' using '''Isopropyl Alcohol 90%+''' to remove all traces of corrosion and water. Do not use "rubbing alcohol" as in some cases this is only 70% and is not as effective. If you do check the label to verify the amount
 
Here is a link that describes the process.
 
[[Electronics Water Damage]]
 
You ''may'' have to replace the battery as it is very hard to recover a battery from water damage.
 
As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the board.
 
Hopefully after you have done all this the phone ''might'' possibly work correctly again.
 
Here is a link to the ifixit guide(s) for repairing your phone.
 
[[Topic:LG G5]]
 
If this process seems too daunting, take your phone to a reputable, professional mobile phone repair service and ask for a quote for a repair. If you decide to do this,'' do it sooner than later''.

状态:

open

编辑: jayeff ,

文本:

Hi,
 
As you know water and electronics and electricity are not a good mix.
 
''The water causes corrosion and provides circuit paths for the electricity which were not in the phone's operating design and could damage the components.components. The corrosion process starts straight away''
''The water causes corrosion and provides circuit paths for the electricity which were not in the phone's operating design and could damage the components.components. The corrosion process starts straight away''
 
''First '''do not turn on your phone''' and then you need to with the phone turned off, '''remove the battery as soon as possible''' from the phone'' to minimize further damage.''
 
Then you need to dis-assemble the rest of the phone and clean ''all the affected parts'' using '''Isopropyl Alcohol 90%+''' to remove all traces of corrosion and water. Do not use "rubbing alcohol" as in some cases this is only 70% and is not as effective. If you do check the label to verify the amount
 
Here is a link that describes the process.
 
[[Electronics Water Damage]]
 
You ''may'' have to replace the battery as it is very hard to recover a battery from water damage.
 
As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the board.
 
Hopefully after you have done all this the phone ''might'' possibly work correctly again.
 
Here is a link to the ifixit guide(s) for repairing your phone.
 
[[Topic:LG G5]]
 
If this process seems too daunting, take your phone to a reputable, professional mobile phone repair service and ask for a quote for a repair. If you decide to do this,'' do it sooner than later''.

状态:

open

原帖由: jayeff ,

文本:

Hi,

As you know water and electronics and electricity are not a good mix.

''The water causes corrosion and provides circuit paths for the electricity which were not in the phone's operating design and could damage the components.''

''First '''do not turn on your phone''' and then you need to with the phone turned off, '''remove the battery as soon as possible''' from the phone'' to minimize further damage.''

Then you need to dis-assemble the rest of the phone and  clean ''all the affected parts'' using '''Isopropyl Alcohol 90%+''' to remove all traces of corrosion and water. Do not use "rubbing alcohol" as in some cases this is only 70% and is not as effective. If you do check the label to verify the  amount

Here is a link that describes the process.

[[Electronics Water Damage]]

You ''may'' have to replace the battery as it is very hard to recover a battery from water damage.

As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the board.

Hopefully after you have done all this the phone ''might'' possibly work correctly again.

Here is a link to the ifixit guide(s) for repairing your phone.

[[Topic:LG G5]]

If this process seems too daunting, take your phone to a reputable, professional mobile phone repair service and ask for a quote for a repair. If you decide to do this,'' do it sooner than later''.

状态:

open