跳转到主内容
帮助

当前版本: Inspiraattori ,

标题:

iPhone 6 Plus tristar replacement

文本:

Hello. I have iPhone 6 Plus and I replaced tristar to it. Before repair I tested it with multimeter for how mutch USB cable give power to the battery bracket on logigboard
 
[image|988166]
 
and the volt was 0.01v and with new tristar the battery bracket gived random volts wery fast 3.50v, 2.45v 1.20v etc. Do anybody have any ideas what is going on? Before repair iPhone wasn't charging or warming at all and no powered on. Screen was black and still is. I have reflowed it without any results.
 
Any help would be much appreciated.

EDIT 01.08.2017
With new good battery and tristar reflowed once again the iPhone works again.
Any help would be much appreciated.

EDIT 01.08.2017
With new good battery and tristar reflowed once again the iPhone works again.

设备:

iPhone 6 Plus

状态:

open

编辑: Inspiraattori ,

标题:

iPhone 6 Plus tristar replacement

文本:

Hello. I have iPhone 6 Plus and I replaced tristar to it. Before repair I tested it with multimeter for how mutch USB cable give power to the battery bracket on logigboard
 
[image|988166]
 
and the volt was 0.01v and with new tristar the battery bracket gived random volts wery fast 3.50v, 2.45v 1.20v etc. Do anybody have any ideas what is going on? Before repair iPhone wasn't charging or warming at all and no powered on. Screen was black and still is. do I have reflowed it without any results.

and the volt was 0.01v and with new tristar the battery bracket gived random volts wery fast 3.50v, 2.45v 1.20v etc. Do anybody have any ideas what is going on? Before repair iPhone wasn't charging or warming at all and no powered on. Screen was black and still is. do I have reflowed it without any results.

Any help would be much appreciated.

设备:

iPhone 6 Plus

状态:

open

编辑: Inspiraattori ,

标题:

iPhone 6 Plus tristar replacement

文本:

Hello. I have iPhone 6 Plus and I replaced tristar to it. Before repair I tested it with multimeter for how mutch USB cable give power to the battery bracket inon logigboard
Hello. I have iPhone 6 Plus and I replaced tristar to it. Before repair I tested it with multimeter for how mutch USB cable give power to the battery bracket inon logigboard
 
[image|988166]
 
and the volt was 0.01v and with new tristar the battery bracket givegived random volts wery fast 3.50v, 2.45v 1.20v etc. Do anybody have any ideas what is going on? Before repair iPhone wasn't charging or warming at all and no powered on. Screen was black and still is. do I have reflowed it without any results.

and the volt was 0.01v and with new tristar the battery bracket givegived random volts wery fast 3.50v, 2.45v 1.20v etc. Do anybody have any ideas what is going on? Before repair iPhone wasn't charging or warming at all and no powered on. Screen was black and still is. do I have reflowed it without any results.

Any help would be much appreciated.

设备:

iPhone 6 Plus

状态:

open

原帖由: Inspiraattori ,

标题:

iPhone 6 Plus tristar replacement

文本:

Hello. I have iPhone 6 Plus and I replaced tristar to it. Before repair I tested it with multimeter for how mutch USB cable give to the battery bracket  in logigboard

[image|988166]

and the volt was 0.01v and with new tristar the battery bracket give random volts wery fast  3.50v, 2.45v  1.20v etc. Do anybody have any ideas what is going on? I have reflowed it without any results.

Any help would be much appreciated.

设备:

iPhone 6 Plus

状态:

open