当前版本: mayer (投票详情) ,
标题:
Why don't startup, what is failing?
文本:
Hi, i have just bought a a1138 powerbook g4, i was testing installed apps then, system got frozen, i pushed power on button and hold until it shut down, now it don't startup. |
Powers on but: |
* No chimes |
* Sleep led is on |
* Superdrive spins in cycles |
* Battery charges |
* If I push the shift key its LED lights on and then off |
* Seems that no reaction to any key booting options like secure mode or reset nvram ... |
* If i remove RAM , it starts and sleep LED blinks |
* I tried removing the RAM too |
* If i hold power on button, all fans run and then same behavior. |
Thanks all for reading |
设备:
PowerBook G4 Aluminum 15" 1.67 GHz
状态:
open
已接受的回答:
358207 |
编辑: Dan ,
标题:
Why don't startup, what is failing?
文本:
Hi, i have just bought a a1138 powerbook g4, i was testing installed apps then, system got frozen, i pushed power on button and hold until it shut down, now it don't startup. |
Powers on but: |
- no - sleep * Sleep led is on - superdrive spindles * Superdrive spins in cycles - battery * Battery charges - if i * If I push -seems * Seems that no - if * If i remove RAM , it starts and sleep - i tryed working ram * I tried removing the RAM too -if * If i hold power on button, all fans run and then same behavior. |
- no - sleep * Sleep led is on - superdrive spindles * Superdrive spins in cycles - battery * Battery charges - if i * If I push -seems * Seems that no - if * If i remove RAM , it starts and sleep - i tryed working ram * I tried removing the RAM too -if * If i hold power on button, all fans run and then same behavior. |
Thanks all for reading |
设备:
PowerBook G4 Aluminum 15" 1.67 GHz
状态:
open
原帖由: Rafael Gandia ,
标题:
Why don't startup, what is failing?
文本:
Hi, i have just bought a a1138 powerbook g4, i was testing installed apps then, system got frozen, i pushed power on button and hold until it shut down, now it don't startup. Powers on but: - no chimes - sleep led is on - superdrive spindles in cycles - battery charges - if i push block shift its led power on and then power off -seems that no react to key booting options like secure mode or reset nvram... - if i remove RAM , it starts and sleep led blink - i tryed working ram too -if i hold power on button, all fans run and then same behavior. Thanks all for reading
设备:
PowerBook G4 Aluminum 15" 1.67 GHz
状态:
open