跳转到主内容
帮助

原帖由: rayeasom ,

文本:

Depending on where you got the replacement screen from will depend on the answer.  It is likely that if the screen is a cheap eBay job then the Touch ID extension ribbon located between the LCD and the metal back plate is faulty, this can be ruled out by removing the back plate on the replacement screen and swapping it with the plate from your original genuine apple screen, this is usually the case if the home button works as a button but not as Touch ID.  There are 8 tiny screw, three on each side, one at the top and one at the bottom.

状态:

open