跳转到主内容
帮助

当前版本: XantheFIN ,

文本:

I got PSU blown up PS3 by heat (was forgotforgotten running in closed glass tv platform). And disc drive jammed by that.
I got PSU blown up PS3 by heat (was forgotforgotten running in closed glass tv platform). And disc drive jammed by that.
 
PSU was trash by blownhad blown buck convertor(?) i replaced it but it didnt set up.. not sure of how put itwork yet so i put just ATX 400Wgive up trying to get PSU via one molex and soldered molex connector hanging at behind of PS3.. motherboard had couple thermal fuses gone fixed and it booted up finallyworking.
PSU was trash by blownhad blown buck convertor(?) i replaced it but it didnt set up.. not sure of how put itwork yet so i put just ATX 400Wgive up trying to get PSU via one molex and soldered molex connector hanging at behind of PS3.. motherboard had couple thermal fuses gone fixed and it booted up finallyworking.
 
I did found out that Disc Drive was jammed and that stop stick was up...So i opened and did reset drive mechanically so it did take and reject disc now.. but didn't load any disc (DVD movie or PS3 (bluray)games) so it can't have both lasers broken.ended up using ATX 400W PSU. Motherboard had couple thermal fuses too which i replaced.
I did found out that Disc Drive was jammed and that stop stick was up...So i opened and did reset drive mechanically so it did take and reject disc now.. but didn't load any disc (DVD movie or PS3 (bluray)games) so it can't have both lasers broken.ended up using ATX 400W PSU. Motherboard had couple thermal fuses too which i replaced.
 
I did at this point this reset system via two beep menu (boot up while holding finger on power button Disc Drive was jammed and letting go when you hear two beeps).. and selecting and going through option number 3.. It didn't workinside drive entry there was that plastic stick up which prevents inserting extra discs in so i continueddisc drive needed resetting mechanically...
I did at this point this reset system via two beep menu (boot up while holding finger on power button Disc Drive was jammed and letting go when you hear two beeps).. and selecting and going through option number 3.. It didn't workinside drive entry there was that plastic stick up which prevents inserting extra discs in so i continueddisc drive needed resetting mechanically...
 
IfAfter reset it doesn't even start spinning like me i suspected does disc even go properly yet in place.. some ones in videos shows "fixes" to put disc while tilting machine little bitdidnt still load any discs (DVD movie or more while ejecting disc in.. i tried i thinkPS3 (bluray)games) but it did little change.. soshouldn't have both read lasers broken at once..
IfAfter reset it doesn't even start spinning like me i suspected does disc even go properly yet in place.. some ones in videos shows "fixes" to put disc while tilting machine little bitdidnt still load any discs (DVD movie or more while ejecting disc in.. i tried i thinkPS3 (bluray)games) but it did little change.. soshouldn't have both read lasers broken at once..
 
I opened still case and heard that disc when inserted wasn't balanced (i forgot put that what comes top of disc drive that freely spinning magnetic disc... ops).. i tightened screws and put that disc.. it started finally spinning discs and too when placed on verticallyhad reset PS3 system too.
I opened still case and heard that disc when inserted wasn't balanced (i forgot put that what comes top of disc drive that freely spinning magnetic disc... ops).. i tightened screws and put that disc.. it started finally spinning discs and too when placed on verticallyhad reset PS3 system too.
 
HopeI noted then it didn't even start spinning disc properly so disc didn't go in place yet properly.

Some Youtube videos shows "fixes" to tilt machine little bit or more while ejecting disc in.. it did help so..



I opened PS3 and heard that disc when inserted wasn't balanced (i forgot put that what comes top of disc drive that freely spinning magnetic disc... ops)

it started finally spinning discs and works still this day.


Hope
this gives ideas to go through symptons and find out what is wrong in your case. Not just blindly say what is chosen option over here like can hear from random stores warranty serviceshere. It's horrible wrong to not know what really is wrong or is it at allproblem.. lazy people not able diagnose problems!
HopeI noted then it didn't even start spinning disc properly so disc didn't go in place yet properly.

Some Youtube videos shows "fixes" to tilt machine little bit or more while ejecting disc in.. it did help so..



I opened PS3 and heard that disc when inserted wasn't balanced (i forgot put that what comes top of disc drive that freely spinning magnetic disc... ops)

it started finally spinning discs and works still this day.


Hope
this gives ideas to go through symptons and find out what is wrong in your case. Not just blindly say what is chosen option over here like can hear from random stores warranty serviceshere. It's horrible wrong to not know what really is wrong or is it at allproblem.. lazy people not able diagnose problems!

状态:

open

原帖由: XantheFIN ,

文本:

I got PSU blown up PS3 by heat (was forgot in closed glass tv platform).

PSU was trash by blown buck convertor(?) i replaced but it didnt set up.. not sure of how put it so i put just ATX  400W PSU via one molex and soldered molex connector hanging at behind of PS3.. motherboard had couple thermal fuses gone fixed and it booted up finally.

I did found out that Disc Drive was jammed and that stop stick was up... i opened and did reset drive mechanically so it did take and reject disc now.. but didn't load any disc (DVD movie or PS3 (bluray)games) so it can't have both lasers broken..

I did at this point this reset system via two beep menu (boot up while holding finger on power button and letting go when you hear two beeps).. and selecting and going through option number 3.. It didn't work so i continued..

If it doesn't even start spinning like me i suspected does disc even go properly yet in place.. some ones in videos shows "fixes" to put disc while tilting machine little bit or more while ejecting disc in.. i tried i think it did little change.. so

I opened still case and heard that disc when inserted wasn't balanced (i forgot put that what comes top of disc drive that freely spinning magnetic disc... ops).. i tightened screws and put that disc.. it started finally spinning discs and too when placed on vertically.

Hope this gives ideas to go through symptons and find out what is wrong in your case. Not just blindly say what is chosen option over here like can hear from random stores warranty services. It's horrible wrong not know what really is wrong or is it at all.. lazy people not able diagnose problems!

状态:

open