跳转到主内容
帮助

当前版本: Sam Goldheart (投票详情) ,

文本:

The wifi antenna has two solder points. The one on the right frequently breaks loose especially if dropped. It needs soldered back on. It's seldom the antenna detaching from the board. All it takes is the antenna itself being bent a little to pop the solder joint loose.

Hope this gets everyone going again.

状态:

-deleted
+open

编辑: iRobot ,

文本:

The wifi antenna has two solder points. The one on the right frequently breaks loose especially if dropped. It needs soldered back on. It's seldom the antenna detaching from the board. All it takes is the antenna itself being bent a little to pop the solder joint loose.

Hope this gets everyone going again.

状态:

-open
+deleted

原帖由: KcXbox Repair ,

文本:

The wifi antenna has two solder points. The one on the right frequently breaks loose especially if dropped. It needs soldered back on. It's seldom the antenna detaching from the board. All it takes is the antenna itself being bent a little to pop the solder joint loose.

Hope this gets everyone going again.

状态:

open