跳转到主内容
帮助

当前版本: tsoump ,

标题:

MacBook A1181 when starts the screen is dimming when starts - no inverter
MacBook A1181 when starts the screen is dimming when starts - no inverter

文本:

I got a used macbook A1181 2006 Core  Duo 1.83 Ghz (32bit- non Estar) and there was a problem, at the begging, on the battery charging issue. I opened the macbook and I found a wrong battery connector / sleep SW component. To be clear:

My logic board supports this (Non Estar- 20pins): [product|IF186-015]

I found this (18pins): [product|IF186-042]

The problem was that, when I insert a battery (original or not) the screen was dimming while (for example) surfing on the internet. So the macbook had not battery support - only by the cable.

I supposed adding the 2 missing pins manually could solve my problem.

After of many tries of adding 2 more pins and many SMC and PRAM resets, my screen dims (like inverter's problem) when macbook starts.

The only way to open properly without dimming screen is when I reset SMC and start the macbook - and fan is go like crazy!!! (that's meaning not inverter's issue)

After that I thought to clean all contacts with isopropyl alcohol in any case.

I'm trying to find the problem that I caused and I believe that if:

1. it's a software issue: is about SMC resets etc

2. it's a hardware issue: is logic board power issue

P.S. I also give you some photos from (a) the logic board (b) battery / sleep sensor and (c) a video by laptop's behavior:

https://www.dropbox.com/sh/0spkzmkjetys4f1/AAC6aZezboQfm9P2iBRZfX8Xa?dl=0

Thank you in advance and sorry for my English.

设备:

MacBook Core 2 Duo

状态:

open

编辑: tsoump ,

标题:

MacBook A1181 screen is dimming when starts - no inverter

文本:

I got a used macbook A1181 2006 Core Duo 1.83 Ghz (32bit- non Estar) and there was a problem, at the begging, on the battery charging issue. I opened the macbook and I found a wrong battery connector / sleep SW component. To be clear:
I got a used macbook A1181 2006 Core Duo 1.83 Ghz (32bit- non Estar) and there was a problem, at the begging, on the battery charging issue. I opened the macbook and I found a wrong battery connector / sleep SW component. To be clear:
 
My logic board supports this (Non Estar- 20pins): [product|IF186-015]
 
I found this (18pins): [product|IF186-042]
 
The problem was that, when I insert a battery (original or not) the screen was dimming while (for example) surfing on the internet. So the macbook had not battery support - only by the cable.
 
I supposed adding the 2 missing pins manually could solve my problem.
 
After of many tries of adding 2 more pins and many SMC and PRAM resets, my screen dims (like inverter's problem) when macbook starts.
 
The only way to open properly without dimming screen is when I reset SMC and start the macbook - and fan is go like crazy!!! (that's meaning not inverter's issue)
 
After that I thought to clean all contacts with isopropyl alcohol in any case.
 
I'm trying to find the problem that I caused and I believe that if:
 
1. it's a software issue: is about SMC resets etc
 
2. it's a hardware issue: is logic board power issue
 
 
P.S. I also give you some photos from (a) the logic board (b) battery / sleep sensor and (c) a video by laptop's behavior:
 
https://www.dropbox.com/sh/0spkzmkjetys4f1/AAC6aZezboQfm9P2iBRZfX8Xa?dl=0
 
Thank you in advance and sorry for my English.

设备:

MacBook Core 2 Duo

状态:

open

编辑: tsoump ,

标题:

MacBook A1181 screen is dimming when starts - no inverter
MacBook A1181 screen is dimming when starts - no inverter

文本:

I got a used macbook A1181 2006 1.83 Ghz (32bit- non Estar) and there was a problem, at the begging, on the battery charging issue. I opened the macbook and I found a wrong battery connector / sleep SW component. To be clear:
 
My logic board supports this (Non Estar- 20pins): [product|IF186-015]
 
I found this (18pins): [product|IF186-042]
 
The problem was that, when I insert a battery (original or not) the screen was dimming while (for example) surfing on the internet. So the macbook had not battery support - only by the cable.
 
I supposed adding the 2 missing pins manually could solve my problem.
 
After of many tries of adding 2 more pins and many SMC and PRAM resets, my screen dims (like inverter's problem) when macbook starts.
 
The only way to open properly without dimming screen is when I reset SMC and start the macbook - and fan is go like crazy!!! (that's meaning not inverter's issue)
 
After that I thought to clean all contacts with isopropyl alcohol in any case.
 
I'm trying to find the problem that I caused and I believe that if:
 
1. it's a software issue: is about SMC resets etc
 
2. it's a hardware issue: is logic board power issue
 
 
P.S. I also give you some photos from (a) the logic board (b) battery / sleep sensor and (c) a video by laptop's behavior:
 


P.S. I also give you some photos from:

-the logic board

-battery / sleep sensor and

-a video by laptop's behavior:

https://www.dropbox.com/sh/0spkzmkjetys4f1/AAC6aZezboQfm9P2iBRZfX8Xa?dl=0
https://www.dropbox.com/sh/0spkzmkjetys4f1/AAC6aZezboQfm9P2iBRZfX8Xa?dl=0


P.S. I also give you some photos from:

-the logic board

-battery / sleep sensor and

-a video by laptop's behavior:

https://www.dropbox.com/sh/0spkzmkjetys4f1/AAC6aZezboQfm9P2iBRZfX8Xa?dl=0
https://www.dropbox.com/sh/0spkzmkjetys4f1/AAC6aZezboQfm9P2iBRZfX8Xa?dl=0
 
Thank you in advance and sorry for my English.

设备:

MacBook Core 2 Duo

状态:

open

编辑: tsoump ,

标题:

MacBook screen is dimming when starts - no inverter

文本:

I got a used macbook A1181 2006 1.83 Ghz (32bit- non Estar) and there was a problem, at the begging, on the battery charging issue. I opened the macbook and I found a wrong battery connector / sleep SW component. To be clear:
 
My logic board supports this (Non Estar- 20pins): [product|IF186-015]
 
I found this (18pins): [product|IF186-042]
 
The problem was that, when I insert a battery (original or not) the screen was dimming while (for example) surfing on the internet. So the macbook had not battery support - only by the cable.
 
I supposed adding the 2 missing pins manually could solve my problem.
 
After of many tries of adding 2 more pins and many SMC and PRAM resets, my screen dims (like inverter's problem) when macbook starts.
 
The only way to open properly without dimming screen is when I reset SMC and start the macbook - and fan is go like crazy!!! (that's meaning not inverter's issue)
 
After that I thought to clean all contacts with isopropyl alcohol in any case.
 
I'm trying to find the problem that I caused and I believe that if:
 
1. it's a software issue: is about SMC resets etc
 
2. it's a hardware issue: is logic board power issue
 
Thank you very much.
 
Sorry for my English
Sorry for my English
 
P.S. I also give you some photos from:
 
-the logic board
 
-battery / sleep sensor and
 
-a video by laptop's behavior:
 
https://www.dropbox.com/sh/0spkzmkjetys4f1/AAC6aZezboQfm9P2iBRZfX8Xa?dl=0

Thank you in advance and sorry for my English.
https://www.dropbox.com/sh/0spkzmkjetys4f1/AAC6aZezboQfm9P2iBRZfX8Xa?dl=0

Thank you in advance and sorry for my English.

设备:

MacBook Core 2 Duo

状态:

open

编辑: tsoump ,

标题:

MacBook screen is dimming when starts - no inverter

文本:

I got a used macbook A1181 2006 1.83 Ghz (32bit- non Estar) and there was a problem, at the begging, on the battery charging issue. I opened the macbook and I found a wrong battery connector / sleep SW component. To be clear:

My logic board supports this (Non Estar- 20pins): [product|IF186-015]

I found this (18pins): [product|IF186-042]

The problem was that, when I insert a battery (original or not) the screen was dimming while (for example) surfing on the internet. So the macbook had not battery support - only by the cable.

I supposed adding the 2 missing pins manually could solve my problem.

After of many tries of adding 2 more pins and many SMC and PRAM resets, my screen dims (like inverter's problem) when macbook starts.

The only way to open properly without dimming screen is when I reset SMC and start the macbook - and fan is go like crazy!!! (that's meaning not inverter's issue)

After that I thought to clean all contacts with isopropyl alcohol in any case.

I'm trying to find the problem that I caused and I believe that if:

1. it's a software issue: is about SMC resets etc

2. it's a hardware issue: is logic board power issue

Thank you very much.

Sorry for my English

P.S. I also give you some photos from:

-the logic board

-battery / sleep sensor and

-a video by laptop's behavior:

https://www.dropbox.com/sh/0spkzmkjetys4f1/AAC6aZezboQfm9P2iBRZfX8Xa?dl=0

设备:

Macbook A1181 mid 2006 1.83ghzMacBook Core 2 Duo
Macbook A1181 mid 2006 1.83ghzMacBook Core 2 Duo

状态:

open

原帖由: tsoump ,

标题:

MacBook screen is dimming when starts - no inverter

文本:

I got a used macbook A1181 2006 1.83 Ghz (32bit- non Estar) and there was a problem, at the begging, on the battery charging issue. I opened the macbook and I found a wrong battery connector / sleep SW component. To be clear:

My logic board supports this (Non Estar- 20pins): [product|IF186-015]

I found this (18pins): [product|IF186-042]

The problem was that, when I insert a battery (original or not) the screen was dimming while (for example) surfing on the internet. So the macbook had not battery support - only by the cable.

I supposed adding the 2 missing pins manually could solve my problem.

After of many tries of adding 2 more pins and many SMC and PRAM resets, my screen dims (like inverter's problem) when macbook starts.

The only way to open properly without dimming screen is when I reset SMC and start the macbook - and fan is go like crazy!!! (that's meaning not inverter's issue)

After that I thought to clean all contacts with isopropyl alcohol in any case.

I'm trying to find the problem that I caused and I believe that if:

1. it's a software issue: is about SMC resets etc

2. it's a hardware issue: is logic board power issue

Thank you very much.

Sorry for my English

P.S. I also give you some photos from:

-the logic board

-battery / sleep sensor and

-a video by laptop's behavior:

https://www.dropbox.com/sh/0spkzmkjetys4f1/AAC6aZezboQfm9P2iBRZfX8Xa?dl=0

设备:

Macbook A1181 mid 2006 1.83ghz

状态:

open